The real key to the success of the system is that as a pre-finished aluminium product maintenance is minimal and the lifespan of the material is significant.
Its ease of installation negates the need for any specialised contractors to install and the great advantage is that from a construction perspective no other trades (e.g. painters) are required to follow. Therefore at the completion of the Nu-Wall® installation, expensive access can immediately be de hired as the elevation is complete.
Cladding Systems is proud to be the Australian distributors of the Nu-Wall® range of architectural cladding products, suitable for high-end residential and commercial use.
Energy Efficient
The Nu Wall® system is extruded by an ISO 9001 certified manufacturer and utilises up to 65% reclaimed material in the extrusion process.
Recycled aluminium uses only 1% of the energy required to produce aluminium from scratch. This makes Nu Wall® a very environmentally friendly cladding selection for your next project. To further reduce waste Nu Wall® is extruded specifically to your project requirements – on larger projects a combination of lengths can be ordered at no cost penalty.
In addition, on projects of a reasonable size, you have the option of choosing energy-efficient Cool Chemistry® powder coat finishes from Interpon® that under lab conditions have created up to a 20° C drop in substrate temperatures.
Extensive Range of Finishes
Unlike more expensive cladding products available to designers, the Nu Wall® system does not limit your colour selection to a restrictive standard colour range.
With Nu Wall® you have the ability to choose colours from the extensive Interpon® or Dulux® powder coat colour selector, from standard Colorbond® colours to pearlescent and textured options. In addition certain Nu Wall® profiles are also able to be anodised either in matt clear or a variety of coloured anodise choices.
Anodising gives the Nu Wall® system a natural metallic look displaying the natural colour variants of aluminium, a look that some specifiers strive for in their designs. Please contact us and seek advice on which profiles are suitable for the anodising finish.
Our products can and have been used on areas as diverse as entrance foyers, shop fit-outs and garage doors. As far as specialised finishes are concerned your future specifications are limited only by your imagination – speak to Cladding Systems to explore the options.
Unlike traditional cladding products on the market when you specify the Nu Wall® system your selection and mixing of finishes is limited only by your imagination. No other system gives you the versatility to combine and blend colours and finishes in the same wall and best of all no further refinishing required.
New Developments
Are you looking to introduce timber, but your client is concerned about the maintenance issues that accompany this specification? Timber is inclined to crack and warp, needs constant re-painting, can be subject to attacks by insects and termites, and cannot be used in areas that are highly exposed to heat or cold.
This will no longer be an issue when you use Cladding Systems products. We offer a variety of timber finishes that can be applied to all of the Nu Wall® profile range.
Although these finishes are slightly more expensive than standard powder coat or anodise finishes the long term maintenance issues faced with the specification of natural timber far outweighs the initial additional cost.
Using similar processes to the timber look a polished stone look can be applied to the Mono 200 profile allowing you to introduce a high price look at a fraction of the cost. What’s more, you don’t need specialised tradespeople to perform the installation.
Do you want to specify standing seam zinc, yet your client’s budget precludes this feature of your design? Cladding Systems, in conjunction with the development team at Nu Wall®, have come up with an all-new alternate that will allow you to achieve this look at a fraction of zinc cost. By combining the Mono 200 profile and the new standing seam ancillary your design will no longer be compromised by budget.
Warranty
The Nu Wall® range comes with warranties of up to 25 years, depending upon the surface finish selected.
Cladding Systems is a well-established company that supplies Australia-wide. We have an excellent reputation in the building industry, and we stand behind all our products.
Profiles
- Aero 70
- Aero 70 is suitable for either horizontal or vertical installation, and each extrusion profile has a cover of 140mm (i.e. each aerofoil is 70mm wide). The repeating aerofoil profile provides a finished appearance having a continuous surface, with inter-board joints being indistinguishable. The profile is compatible with contemporary designs; either as total cladding, or in combination with another Nu-Wall profile, or other material.
- Aero 115
- Aero 115 is suitable for either horizontal or vertical installation. The repeating aerofoil profile provides a finished appearance having a continuous surface, with inter-board joints being indistinguishable. The profile is compatible with contemporary designs; either as total cladding, or in combination with another Nu-Wall profile, or other material. Note that although the single extrusion profile is narrower overall than the Aero 70 and Aero 200, it only contains the one, larger 115mm wide aerofoil.
- Aero 200
- Aero 200 replaces the Aero 190 and is suitable for either horizontal or vertical installation. Each extrusion profile has a cover of 200mm (i.e. each aerofoil is 100mm wide). The repeating aerofoil profile provides a finished appearance having a continuous surface, with inter-board joints being indistinguishable. The profile is compatible with contemporary designs; either as total cladding, or in combination with another Nu-Wall profile, or other material.
- Classique
- Though one of the original Nu-Wall profiles, Classique still enjoys great popularity with those wishing to design and build a more traditionally-appearing dwelling. Typically finished in a conservative, solid powdercoat colour, this profile is difficult to distinguish from painted timber weatherboard. Nu-Wall Classique is suited to installation in a horizontal orientation. Each board has 136mm coverage.
- E200
- Literally hot off the press the new Eden profile provides a negative detail to the original Mono 200 profile. Suitable for both horizontal and vertical applications, it provides a sleek, modern look. Each board has 200mm coverage.
- Louvre 30
- Louvre 30 is the most textured of the Nu Wall profiles and offers a mini bevel-backed appearance. Each extrusion offers 120mm cover width. An ideal application is as feature cladding, combined with another Nu-Wall profile, or with other cladding materials in contemporary designs. Note that this profile requires a traditional fixing through the board rather than the standard clip.
- Louvre 60
- Louvre 60 offers a mini bevel-backed appearance with 120mm cover width. An ideal application is as feature cladding, combined with another Nu-Wall profile, or with other cladding materials in contemporary designs.
- Louvre 120
- While being essentially a bevel-back weatherboard profile, Louvre120 can also be used to stunning effect in contemporary designs when finished in colours appropriate to the application. Metallic or pearlescent powdercoats, or Natural Silver anodising can achieve these kinds of results. Each board offers 120mm of cover.
- Louvre 150
- The Louvre 150 is a brand new extrusion and has been created in response to a demand for a wider louvre profile. It is a bevel-back weatherboard profile that can also be used to striking effect in contemporary designs when finished in colours appropriate to the application. Metallic or pearlescent powdercoats, or natural silver anodising can achieve these kinds of results. Coverage is 150mm.
- Mono 200
- Nu-Wall Mono 200 replaces the Mono 190 profile offers a cost-effective alternative to composite sheet aluminium products. The finished appearance of the cladding is a flat, continuous surface, broken only by the fine inter-board joint. The 200mm wide profile can be installed in either a vertical or horizontal orientation.
- Ripple 150
- While having a profile fundamentally similar to the larger-format Ripple 200, this 150mm wide version has its inter-board joint designed to provide the appearance of a continuous surface. Suitable for either horizontal or vertical installation, each board has 150mm coverage.
- Ripple 200
- The micro-corrugated profile of Nu-Wall Ripple200 has an expressed, visible inter-board joint; the finished appearance showing the distinctly separate cladding boards. This profile lends itself equally well to both horizontal and vertical applications. The wide 200mm cover enables speedy cladding of large areas, such as on commercial buildings. This section replaces the Ripple 190 profile and has 200mm coverage.
- Shiplap
- Shiplap is one of the original Nu-Wall profiles; installed horizontally it offers a straightforward, no-nonsense alternative to painted timber weatherboards. This profile also lends itself well to more contemporary applications; particularly when finished in a less conservative colour and installed in a vertical orientation. Each board has 150mm coverage.
- Ullos 1
- Nu-Wall Ullos was designed by Bull-O’Sullivan Architecture of Auckland as a premium exterior cladding for certain significant projects of theirs. The profile was adapted to be compatible in all respects with the Nu-Wall system. This avant-garde profile is suitable for either horizontal or vertical installation. Each board has a coverage of 162mm.
- Ullos 2
- Ullos 2 is a bolder version of the original Ullos, and adds striking visual texture to any building. It is suitable for commercial and domestic use and can be installed in a horizontal or vertical orientation. Each board has a coverage of 162mm. Note that this profile requires a traditional fixing through the board rather than the standard clip.
Read less...
To contact Cladding Systems about Wall Cladding | Nu-Wall® use Get a quote.
