Decorative Panel & Wall | MetecnoKasset for sale from Cladding Systems

Decorative Panel & Wall | MetecnoKasset

Supplier: Cladding Systems

Decorative Panel & Wall | MetecnoKasset

A durable, insulated wall ceiling and panel with a modified PIR (Polyisocyanurate) fire-retardant core & high performing thermal properties.

In Stock

MetecnoKasset was the perfect choice for the Yorkshire Brewery (pictured above). With limited access for cranes and scaffolding, standard curtain wall and insulated panel systems were difficult to install. Because MetecnoKasset can be installed from inside the building, it allowed the developers to use insulated panel products without the added costs and logistics.

MetecnoKasset is available in a range of COLORBOND® colours, a palette of choice to create an inspiring interior and exterior finish.

A complete system
Tested & Passed all criteria for AS 5113 – External wall and Fire Spread requirements
Manufactured in Australia
New level of fire protection
New level of thermal properties
Prefab sections delivered directly to site
Slot into place and secure
Build, clad and insulate all in one

PIR Full Curtain or Window Wall System

Modular unit for seamless window/ wall junctions
Durable & versatile Architectural System
Extensive colours and finishes

Low & High-Rise (wind rated up to 250m)

Testing & engineering in Australia by Ian Bennie & Associates & Inhabit Group
Registered Design & Regulation 1507: Certificate of Compliance
Full test rig accreditation to Australian standards AS/NZS 4284:2008 (Structural SLS, Air Infiltration, Water Penetration, Structural ULS.)

Fast & Economical Alternative to Tilt Panel

Lightweight & easy to install (up to 50% faster)
No need for perimeter scaffolding. Installed over handrails or behind screens.
2 floors p.w. cycle at Yorkshire Brewery Apartments

Module Specifications

Module Thickness	115 mm
Module Height	Made to measure up to 3800mm in height
Module Width	Made to measure incorporating 1100mm wide panels
Mass	22.1 kg/m²
Acoustic Properties	Rw 25-37*
Thermal Performance	‘R’ Value: 4.91 W/m²K; ‘U’ Value: 0.20 m²K/W
Module composition	Modified FM approved PIR (Fire –retardant Polyisocyanurate) panel with prefinished profiled steel skins and internal skin lined with 6mm fibre cement.
Frame Material	Anodized or Powder coated extruded Aluminium with extruded weather seals
Colours	Choice of any Colorbond^® standard, metallic or custom colour for external skin, frame and trims.
Finishes	Panel surface can be supplied in Plain, Fineline, Satinline or Ribbed profiles.

*depending on system

Test and Engineering

Façade Fire Evaluation testing to NATA accreditation requirements by Exova Warringtonfire Aus.	Testing to AS 5113 according to their tendency to limit the spread of fire across their surface and between neighbouring buildings and integrates international standard test methods where practicable.
Building performance testing in Australia to NATA accreditation requirements by Ian Bennie & Associates	Structural SLS, Air Infiltration, Water Penetration and Structural ULS test procedures and performance requirements in accordance with standard AS/NZS 4284:2008, Testing of Building Facades. Optional tests: including BMU restraint, seismic loading and seal degradation.
Engineering certification to the provisions of the section B1 of the Building Code of Australia and the Australian Standards by Inhabit Australasia	AS/NZS 1170.0:2002- Structural design actions – Part 0: General Principles AS/NZS 1170.1:2002, Structural design actions – Part 1: Permanent, imposed & other actions AS/NZS 1170.2:2002, Structural design actions – Part 2: Wind actions AS/NZS 1664.1:1997, Aluminium Structures AS4100:1998, Steel Structures
Codemark Certification	Coming Soon

To contact Cladding Systems about Decorative Panel & Wall | MetecnoKasset use Get a quote.