Unimig Air Plasma Cutter | Razor Cut 40

Unimig - Air Plasma Cutter | Razor Cut 40

Supplier: Gasweld

Air Plasma Cutter | Razor Cut 40

The RAZOR™ CUT 40 AIR is the perfect plasma cutter for the professional who wants a powerful plasma cutter with a built-in air compressor. Fitted with a 15 AMP plug, this machine is made for the workshop and worksite.

In Stock

Fitted with a 15 AMP plug, this machine is made for the workshop and worksite. The RAZOR™ CUT 40 AIR boasts some serious cutting power with 10mm clean-cut and 12mm severance on the built-in air compressor, and 16mm clean-cut and 20mm severance on an external compressor.

Applications:

Ideal for cutting various conductive materials such as stainless steel, aluminum, copper, and mild steel.
Perfect for automotive repair, fabrication shops, construction sites, and home DIY projects.
Suitable for cutting thin to medium thickness materials with precision and efficiency.

BUILT-IN AIR COMPRESSOR

The RAZOR CUT 40 AIR comes with a built-in air compressor, giving you more flexibility with a plasma cutter than ever before. Connect an external air compressor for even greater cutting power.

PERFORATED CUTTING MODE

Cuts both solid material and perforated materials with ease.

PILOT ARC START

Pilot Arc Start lets you start the arc before contacting the work piece. This gives you better control of the torch, especially on materials with uneven or curved surfaces.

Machine Specifications

Primary Input Voltage: 240V Single Phase
Supply Plug: 15 AMP
Rated Input Power (kVA): 7.2
Ieff (A): 15
Rated Output: 96V
No Load Voltage (V): 210
Protection Class: IP21
Insulation Class: H
Minimum Generator (kVA): 10.0
Dinse Connector: 10/25
Standard: AS/NZ60974-1

Plasma Specifications

Plasma Cut Current Range: 20-40A
Plasma Cut Duty Cycle @ 40°C: 25% @ 40A / 60% @ 26A / 100% @ 20A
Mild Steel Cut Thickness: 12mm (INTERNAL) / 16mm (EXTERNAL)
Mild Steel Severance Thickness: 14mm (INTERNAL) / 18mm (EXTERNAL)
Aluminium Cut Thickness: 6mm (INTERNAL) / 8mm (EXTERNAL)
Aluminium Severance Thickness: 8mm (INTERNAL) / 10mm (EXTERNAL)
Stainless Steel Cut Thickness: 6mm (INTERNAL) / 8mm (EXTERNAL)
Stainless Steel Severance Thickness: 8mm (INTERNAL) / 10mm (EXTERNAL)
Air Flow Draw Off (L/min): 120
Air Flow Pressure (Bar): 5.17 (75 psi)
Plasma Arc Start: Pilot Arc

To contact Gasweld about Unimig Air Plasma Cutter | Razor Cut 40 use Get a quote.