Newtronic BOD Incubator

Newtronic - BOD Incubator

Supplier: Biotec Solutions

BOD Incubator

BOD INCUBATORS (COOL INCUBATORS)

In Stock

B.O.D. stands for Bacteriological Oxygen Demand. NEWTRONIC's BOD Incubators are ideal for the growth & storage of bacterial cultures, gentle incubation & conditioning and Media Preparation.

Media Prepartion & Culture growth at temperatures of 22.5°C (±2.5°C) & 32.5°C (±2.5°C) have become a standard practice in any Microbiology or ARD labs.

The chambers ensure consistent performance at any temperature within a range of 5°C to 60°C at an accuracy of ±0.5°C & at an uniformity of ±1°C.

The chambers are provided with a glass door for sample viewing & quick retrieval. They are connected through Ethernet to state-of-the-art 21 CFR Part 11 ready software that provide tools for viewing, trending, alarm management, audit trails, MKT & many other such features so as to comply with regulatory guidelines.

Features

Ethernet Communication
- High-speed data transfer
- Significantly faster than serial(RS-485) communication
- Global standard for communication protocol
- No need for a separate PC interface
- Data Operations from any PC over the LAN
Standby Humidity & Cooling System
- Completely ready-to-use systems
- Automatic switch-over upon failure of primary systems to achieve conditions
- Switch-over also upon detection of HP/LP & Internal fault
- Scheduled & manual change-overs
- Recording of all change-overs in the software
Touchscreen Door Access System
- Temperature & Humidity Deviations
- Door Opening
- Water Supply Failure
- Component Failure
- Mains Failure
Alarm Transmission
- Mobile alert system
- Time of alarm transmission
- Name of equipment
- Transmitted message(Equipment name, alarm time, type of alarm & limits)
Mobile Alert
- Time of Alarm transmission
- Name of Equipment
- Transmitted message(Equipment name, alarm time, type of alarm & limits)
Safety
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
ICDAS Software
- 21 CFR Part 11 Ready
- Single software suitable for up to 20 equipment
- Automatic daily data back-up
- Alarm logs. Alarm acknowledgement with e-signatures
- Audit trails
- MKT Calculations
- Graphical viewing & data trending
- Data export in pdf format
Documentation and Training
- IQ, OQ, PQ
- Calibration certificates
- Operations & maintenance manuals
- GA & Electrical drawings
- Material test certificates
- Training to end-users

Specifications

Temperature Range	10°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C

Standard Equipment

Double walled with PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Stainless Steel Trays	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature sensor with 4-20mA output
Forced air circulation for uniform temperature	Safety devices: Low & High temperature cut-off settable thermostats
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Audio/Visual alarms for deviations
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser	Complete with IQ, OQ, PQ & Operations & Maintenance Manual

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

Optional Accessories

ICDAS - A Common Software suitable for 20 nos. Newtronic make equipment	Door Access system (Biometric and Numeric)
4pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs (430 litres & above)	Remote alarm system suitable for 4 nos. Newtronic make equipment

To contact Biotec Solutions about Newtronic BOD Incubator use Get a quote.

Features

Ethernet Communication
- High-speed data transfer
- Significantly faster than serial(RS-485) communication
- Global standard for communication protocol
- No need for a separate PC interface
- Data Operations from any PC over the LAN
Standby Humidity & Cooling System
- Completely ready-to-use systems
- Automatic switch-over upon failure of primary systems to achieve conditions
- Switch-over also upon detection of HP/LP & Internal fault
- Scheduled & manual change-overs
- Recording of all change-overs in the software
Touchscreen Door Access System
- Temperature & Humidity Deviations
- Door Opening
- Water Supply Failure
- Component Failure
- Mains Failure
Alarm Transmission
- Mobile alert system
- Time of alarm transmission
- Name of equipment
- Transmitted message(Equipment name, alarm time, type of alarm & limits)
Mobile Alert
- Time of Alarm transmission
- Name of Equipment
- Transmitted message(Equipment name, alarm time, type of alarm & limits)
Safety
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
ICDAS Software
- 21 CFR Part 11 Ready
- Single software suitable for up to 20 equipment
- Automatic daily data back-up
- Alarm logs. Alarm acknowledgement with e-signatures
- Audit trails
- MKT Calculations
- Graphical viewing & data trending
- Data export in pdf format
Documentation and Training
- IQ, OQ, PQ
- Calibration certificates
- Operations & maintenance manuals
- GA & Electrical drawings
- Material test certificates
- Training to end-users

Specifications

Temperature Range	10°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C

Standard Equipment

Double walled with PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Stainless Steel Trays	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature sensor with 4-20mA output
Forced air circulation for uniform temperature	Safety devices: Low & High temperature cut-off settable thermostats
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Audio/Visual alarms for deviations
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser	Complete with IQ, OQ, PQ & Operations & Maintenance Manual

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

Optional Accessories

ICDAS - A Common Software suitable for 20 nos. Newtronic make equipment	Door Access system (Biometric and Numeric)
4pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs (430 litres & above)	Remote alarm system suitable for 4 nos. Newtronic make equipment