Homag Edge Bender | EDGETEQ S-200

Homag - Edge Bender | EDGETEQ S-200

Supplier: Homag Australia

Edge Bender | EDGETEQ S-200

8 m/min | 11 m/min feed speed: The perfect starting point

In Stock

If you are new to mechanical edge processing, you have come to the right place. Fully process your workpieces with joining and profile trimming. All the machines are equipped with a precise gluing unit (i.a. for processing of PUR-glue). On request, we can equip two free spaces for post-processing in accordance with your requirements to provide you with optimum flexibility. Alongside the machine‘s extensive unit equipment, automation of the units is also a possibility. Thanks to their short and compact design, these machines are suitable for use even in the smallest of workshops.

Product Benefits:

5 different models to meet every requirement
Perfect edges
Optimum entry-level machine
Short, compact machine
Intuitive operation – innovative easyTouch control system
Highly flexible configuration

Product Features:

For banding edges of up to 3 mm and workpieces of up to 40 mm (60 mm - 1130 FC | 1130 AT)
Also available with joint trimming unit for a perfect cut and optimum glue joint quality
Glue applied directly onto the workpiece to ensure constant application (i.a. for processing of PUR-glue).
Two-motor end-trimming unit for optimum cutting results
Contour trimming unit for rounding corners
Freely configurable post-processing for a high level of flexibility
Zero joints - airTec unit for a perfect zero joint finish

Product Specifications:

	Model 1100 / Model 1110 F	Model 1120 FC	Model 1130 FC	Model 1130 AT
Machine length [mm]	3.69	4.305	4.605	4.605
Feed speed 8 [m/min]	8	8	11	8
Workpiece width [mm]* in case of thickness 8 - 22 [mm]	70	70	70	70
Workpiece thickness [mm]	8 - 40	8 - 40	8 - 60	8 - 60
Edge thickness coils [mm]	0,3 - 3	0,3 - 3	0,3 - 3	0,3 - 3
Edge thickness strips / solid strips [mm]	0,4 - 3	0,4 - 3	0,4 - 3	0,4 - 3

To contact Homag Australia about Homag Edge Bender | EDGETEQ S-200 use Get a quote.

Product Benefits:

5 different models to meet every requirement
Perfect edges
Optimum entry-level machine
Short, compact machine
Intuitive operation – innovative easyTouch control system
Highly flexible configuration

Product Features:

For banding edges of up to 3 mm and workpieces of up to 40 mm (60 mm - 1130 FC | 1130 AT)
Also available with joint trimming unit for a perfect cut and optimum glue joint quality
Glue applied directly onto the workpiece to ensure constant application (i.a. for processing of PUR-glue).
Two-motor end-trimming unit for optimum cutting results
Contour trimming unit for rounding corners
Freely configurable post-processing for a high level of flexibility
Zero joints - airTec unit for a perfect zero joint finish

Product Specifications:

	Model 1100 / Model 1110 F	Model 1120 FC	Model 1130 FC	Model 1130 AT
Machine length [mm]	3.69	4.305	4.605	4.605
Feed speed 8 [m/min]	8	8	11	8
Workpiece width [mm]* in case of thickness 8 - 22 [mm]	70	70	70	70
Workpiece thickness [mm]	8 - 40	8 - 40	8 - 60	8 - 60
Edge thickness coils [mm]	0,3 - 3	0,3 - 3	0,3 - 3	0,3 - 3
Edge thickness strips / solid strips [mm]	0,4 - 3	0,4 - 3	0,4 - 3	0,4 - 3