Framecad Roll Formers | FL650

Framecad - Roll Formers | FL650

Supplier: FRAMECAD Limited

Roll Formers | FL650

Roll forming equipment for optimised flooring for large scale multilevel residential or commercial buildings.

Suitable for large scale multi-level

In Stock

The FL650 is suitable for large scale multi-level, residential or commercial buildings. Producing dedicated C & U profiles between 250mm (10”) and 305mm (12”) up to 2.5mm thickness. This machine's unique punching system provides provisions for easy installation of the HVAC and MEP, along with other electrical and plumbing services, without compromising on joint or profile strength.

Product Features:

The FL650 is suitable for the high volume construction of residential and multi-storey buildings
Joists sit at the same level as the perimeter, achieving a full load transfer for multi-level & modular structures, providing strength and reliability.
Smart internet connectivity provides cloud-based data reporting to enable real time production management and technical diagnostics to improve efficiency.
Automated high line speed up to 1,350m/hr results in a high performing Flooring System manufacturing process.
The FL650 profile requires fewer screw joins than web joist system.
Hot climate hydraulic cooling system to perform in high temperature operating environments and large scale production facilities.

Product Specifications:

FL650
Profile Width (Web)	Range 250mm - 305mm or 10" - 12"
Profile Height (Flange)	40mm - 75mm or 1 5/8" - 3"
Material Thickness	1.2 - 2.5mm or 47 - 97mils (18 - 12 gauge)
Roll Forming Stations	17 forming stations
Punching Stations	7 Punching stations
Standard Punch Tooling*	Web bolt hole, Flange screw hole, Tab punch, web/tab screw holes, flange bolt hole, large service hole (extruded) & small service hole.
Max Line Speed	1,350m/hr (4,430ft./hr)
Typical Production Speed (actual dependent on framing design)	250-600m/hr (820-1970ft./hr)
Main Drive Power	23kW (30.8hp)
Hydraulic Power	15kW (20hp)
Length	10.0m (32.8ft)
Width	1.55m (5.08ft)
Height - to top of covers	2.05m (6.73ft)
Weight (approx.)	12,800kg (28,220lbs)
Printer	2 Printer heads
Decoiler Capacity	5,000kg (11,000lb) heavy duty powered Decoiler

To contact FRAMECAD Limited about Framecad Roll Formers | FL650 use Get a quote.

Product Features:

The FL650 is suitable for the high volume construction of residential and multi-storey buildings
Joists sit at the same level as the perimeter, achieving a full load transfer for multi-level & modular structures, providing strength and reliability.
Smart internet connectivity provides cloud-based data reporting to enable real time production management and technical diagnostics to improve efficiency.
Automated high line speed up to 1,350m/hr results in a high performing Flooring System manufacturing process.
The FL650 profile requires fewer screw joins than web joist system.
Hot climate hydraulic cooling system to perform in high temperature operating environments and large scale production facilities.

Product Specifications:

FL650
Profile Width (Web)	Range 250mm - 305mm or 10" - 12"
Profile Height (Flange)	40mm - 75mm or 1 5/8" - 3"
Material Thickness	1.2 - 2.5mm or 47 - 97mils (18 - 12 gauge)
Roll Forming Stations	17 forming stations
Punching Stations	7 Punching stations
Standard Punch Tooling*	Web bolt hole, Flange screw hole, Tab punch, web/tab screw holes, flange bolt hole, large service hole (extruded) & small service hole.
Max Line Speed	1,350m/hr (4,430ft./hr)
Typical Production Speed (actual dependent on framing design)	250-600m/hr (820-1970ft./hr)
Main Drive Power	23kW (30.8hp)
Hydraulic Power	15kW (20hp)
Length	10.0m (32.8ft)
Width	1.55m (5.08ft)
Height - to top of covers	2.05m (6.73ft)
Weight (approx.)	12,800kg (28,220lbs)
Printer	2 Printer heads
Decoiler Capacity	5,000kg (11,000lb) heavy duty powered Decoiler