CAN Network Card PCAN PC/104 PLUS Quad | ...

CAN Network Card PCAN PC/104 PLUS Quad | Peak Systems

Supplier: Embedded Logic Solutions

he PCAN-PC/104-Plus Quad card enables the connection of four CAN networks to a PC/104-Plus system.

49 Recent Views In Stock

Up to four cards can be operated, with each piggy-backing off the next. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied. There is galvanic isolation of up to 500 Volts between the computer and CAN sides.

Versions Available

PCAN-PC/104-Plus Quad

Technical Specifications

Form factor PC/104
Use of the 120-pin connection for the PCI bus
Up to four cards can be used in one system
4 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-Bit-ID) und 2.0B (29-Bit-ID)
Connection to CAN bus through D-Sub slot brackets, 9-pin (in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
NXP PCA82C251 CAN transceiver
Galvanic isolation on the CAN connection up to
500 V, separate for each CAN channel
5-Volt supply to the CAN connection can be connected through a solder jumper,
e.g. for external bus converter
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Optionally available: PC/104-ISA stack-through connector

Kit Includes

PCAN-PC/104-Plus Quad card
Two slot brackets with D-Sub connectors for the CAN bus
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-Bit)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 PLUS Quad | Peak Systems use Get a quote.

Versions Available

PCAN-PC/104-Plus Quad

Technical Specifications

Form factor PC/104
Use of the 120-pin connection for the PCI bus
Up to four cards can be used in one system
4 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-Bit-ID) und 2.0B (29-Bit-ID)
Connection to CAN bus through D-Sub slot brackets, 9-pin (in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
NXP PCA82C251 CAN transceiver
Galvanic isolation on the CAN connection up to
500 V, separate for each CAN channel
5-Volt supply to the CAN connection can be connected through a solder jumper,
e.g. for external bus converter
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Optionally available: PC/104-ISA stack-through connector

Kit Includes

PCAN-PC/104-Plus Quad card
Two slot brackets with D-Sub connectors for the CAN bus
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-Bit)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

Read less...

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 PLUS Quad | Peak Systems use Get a quote.

Let Embedded Logic Solutions provide you with a quote

Supplier

Get a quote

Supplier: Embedded Logic Solutions

Distribution: Australia & New Zealand

Location: Parramatta, NSW

Customers: Dept of Defence, Sydney University

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Embedded Logic Solutions are also proudly displaying these credentials:

Established:

2004

Employees:

1-5

Customers:

Dept of Defence, Sydney University

Memberships:

Surface Mount and Circuit Board Association (SMCBA

Distribution:

Australia & New Zealand

Location:

Parramatta , NSW