CAN Network Card PCAN PC/104 Express | ...

CAN Network Card PCAN PC/104 Express | Peak Systems

Supplier: Embedded Logic Solutions

The PCAN-PCI/104-Express card enables the connection of one, two, or four CAN busses to a PCI/104-Express system.

44 Recent Views In Stock

Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied.

There is galvanic isolation of up to 500 Volts between the computer and CAN sides. The card is available as a single, dual, or four-channel version.

Versions Available

PCAN-PCI/104-Express Single Channel
PCAN-PCI/104-Express Single Ch. opto-decoupled
PCAN-PCI/104-Express Dual Ch. opto-decoupled
PCAN-PCI/104-Express Quad opto-decoupled

Technical Specifications

PCI/104-Express card, 1 lane (x1)
Form factor PC/104
Up to four cards can be used in one system
1, 2, or 4 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
NXP PCA82C251 CAN transceiver
Galvanic isolation on the CAN connection up to
500 V, separate for each CAN channel
Supplied only via the 5 V line
5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Optionally available: PCI-104 stack-through connector

Kit Includes

PCAN-PCI/104-Express card
Slot bracket with D-Sub connector(s) for the CAN bus (two for the four-channel version)
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 Express | Peak Systems use Get a quote.

Up to four cards can be stacked together. The CAN bus is connected using a 9-pin D-Sub plug on the slot brackets supplied.

There is galvanic isolation of up to 500 Volts between the computer and CAN sides. The card is available as a single, dual, or four-channel version.

Versions Available

PCAN-PCI/104-Express Single Channel
PCAN-PCI/104-Express Single Ch. opto-decoupled
PCAN-PCI/104-Express Dual Ch. opto-decoupled
PCAN-PCI/104-Express Quad opto-decoupled

Technical Specifications

PCI/104-Express card, 1 lane (x1)
Form factor PC/104
Up to four cards can be used in one system
1, 2, or 4 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
FPGA implementation of the CAN controller (SJA1000 compatible)
NXP PCA82C251 CAN transceiver
Galvanic isolation on the CAN connection up to
500 V, separate for each CAN channel
Supplied only via the 5 V line
5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Optionally available: PCI-104 stack-through connector

Kit Includes

PCAN-PCI/104-Express card
Slot bracket with D-Sub connector(s) for the CAN bus (two for the four-channel version)
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

Read less...

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 Express | Peak Systems use Get a quote.

Let Embedded Logic Solutions provide you with a quote

Supplier

Get a quote

Supplier: Embedded Logic Solutions

Distribution: Australia & New Zealand

Location: Parramatta, NSW

Customers: Dept of Defence, Sydney University

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Embedded Logic Solutions are also proudly displaying these credentials:

Established:

2004

Employees:

1-5

Customers:

Dept of Defence, Sydney University

Memberships:

Surface Mount and Circuit Board Association (SMCBA

Distribution:

Australia & New Zealand

Location:

Parramatta , NSW