CAN Network Card PCAN PC/104 | Peak Systems ...

CAN Network Card PCAN PC/104 | Peak Systems

Supplier: Embedded Logic Solutions

The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system. Multiple PCAN-PC/104 cards can easily be operated using interrupt sharing.

41 Recent Views In Stock

The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system. Multiple PCAN-PC/104 cards can easily be operated using interrupt sharing.

The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 500 Volts between the PC and the CAN sides.

Models Available

CAN-PC/104 Single Channel
PCAN-PC/104 Dual Channel
PCAN-PC/104 Single Channel opto-decoupled
PCAN-PC/104 Dual Channel opto-decoupled

Technical Specifications

Form factor PC/104
Multiple PC/104 cards can be operated in parallel (interrupt sharing)
14 port and 8 interrupt addresses are available for configuration using jumpers
1 or 2 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications
2.0A (11-bit ID) and 2.0B (29-bit ID)
Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
NXP SJA1000 CAN controller, 16 MHz clock frequency
NXP PCA82C251 CAN transceiver
5-Volt supply to the CAN connection can be connected through a solder jumper,
e.g. for external bus converter
Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
(only for IPEH-002056 and IPEH-002057)
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Package Includes

PCAN-PC/104 card
Slot bracket with D-Sub connectors for the CAN bus
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
CAN monitor PCAN-View for DOS
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

For more information or a quote please call or email for a direct reply.

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 | Peak Systems use Get a quote.

Models Available

CAN-PC/104 Single Channel
PCAN-PC/104 Dual Channel
PCAN-PC/104 Single Channel opto-decoupled
PCAN-PC/104 Dual Channel opto-decoupled

Technical Specifications

Form factor PC/104
Multiple PC/104 cards can be operated in parallel (interrupt sharing)
14 port and 8 interrupt addresses are available for configuration using jumpers
1 or 2 High-speed CAN channels (ISO 11898-2)
Bit rates from 5 kbit/s up to 1 Mbit/s
Compliant with CAN specifications
2.0A (11-bit ID) and 2.0B (29-bit ID)
Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
NXP SJA1000 CAN controller, 16 MHz clock frequency
NXP PCA82C251 CAN transceiver
5-Volt supply to the CAN connection can be connected through a solder jumper,
e.g. for external bus converter
Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
(only for IPEH-002056 and IPEH-002057)
Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Package Includes

PCAN-PC/104 card
Slot bracket with D-Sub connectors for the CAN bus
Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.
CAN monitor PCAN-View for DOS
Programming interface PCAN-Basic for developing applications with CAN connection
Programming interfaces for standardized protocols from the automotive sector
Manual in PDF format

For more information or a quote please call or email for a direct reply.

Read less...

To contact Embedded Logic Solutions about CAN Network Card PCAN PC/104 | Peak Systems use Get a quote.

Let Embedded Logic Solutions provide you with a quote

Supplier

Get a quote

Supplier: Embedded Logic Solutions

Distribution: Australia & New Zealand

Location: Parramatta, NSW

Customers: Dept of Defence, Sydney University

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Embedded Logic Solutions are also proudly displaying these credentials:

Established:

2004

Employees:

1-5

Customers:

Dept of Defence, Sydney University

Memberships:

Surface Mount and Circuit Board Association (SMCBA

Distribution:

Australia & New Zealand

Location:

Parramatta , NSW