SafePass LD113 & LD213 Safety Loop Detectors ...

SafePass LD113 & LD213 Safety Loop Detectors

Supplier: Rotech Automation

SafePass LD113 & LD213 Safety Loop Detector

Designed for parking and access control applications these detectors are most often used to open or close boom gates, automatic doors or sliding gates. With a very fast response time of 120ms the LD113 and LD213 loop are an excellent safety feature.

39 Recent Views In Stock

Suitable for parking and other access control situations these loop detectors are commonly used to control automatic boom gates, industrial doors or sliding gates
The compact size of the LD113 and LD213 loop detectors allows them to be easily mounted in confined spaces.

The LD113 is a single channel inductive loop detector - the LD213 is dual channel
The detector is connected to an inductive wire loop mounted in the road surface - when vehicles pass over the loop the detector switches an output
A reset switch allows manual reset during commissioning and testing
Selectable pulse time sets how long the pulse relay will be energised - 0.1 or 0.2 seconds
Pulse relay configures when to energise - on vehicle detection or when the vehicle leaves the loop
Sensitivity boost sets the undetect level to maximum sensitivity to prevent loss of detection of high-bed vehicles
8 x switch selectable sensitivity settings are available providing flexible configuration
2 x switch selectable frequency settings are available to prevent cross-talk between adjacent loops
Filter option provides a delay between vehicle detection and switching of the output relay - usually used to prevent false detection of small or fast-moving objects

Provides a high level of safety and security for even the fastest doors and parking boom gates
Microprocessor and surface mount technology allows a large number of functions to be incorporated into a small device
Eight sensitivity settings and automatic sensitivity boost offer the ability to detect small cars and high bed trucks
Permanent presence option ensures vehicle detection will be maintained when the vehicle is parked over the loop for extended periods.
Easily installed into small spaces.

	LD113B & LD213B Compact Loop Detectors
Power Requirement	10 – 50 VDC 60 mA 8 – 35v VAC 50/60Hz
Presence / Pulse relay	0.5A/220VAC
Indicators	LED indicators show: Power, Detect state and Loop Fault
Detector Tuning Range	15 – 1500 uH
Frequency	Two step adjustable 23—130kHz
Sensitivity Settings	1 – 0.01 % HIGH 2 – 0.02 % 3 – 0.05 % 4 – 0.1 % 5 – 0.2 % 6 – 0.5 % 7 – 1 % 8 – 2 % LOW
Protection	Loop isolation transformer, zener diode and gas discharge tube
Environmental Tracking	Automatic compensation
Response Time	120ms after vehicle enters the loop
Connector	LD 113B: 10Way Screw terminal LD 213B: 14Way Screw terminal
Operating Temperature	-20°C to 70° C

Suitable for parking and other access control situations these loop detectors are commonly used to control automatic boom gates, industrial doors or sliding gates
The compact size of the LD113 and LD213 loop detectors allows them to be easily mounted in confined spaces.

The LD113 is a single channel inductive loop detector - the LD213 is dual channel
The detector is connected to an inductive wire loop mounted in the road surface - when vehicles pass over the loop the detector switches an output
A reset switch allows manual reset during commissioning and testing
Selectable pulse time sets how long the pulse relay will be energised - 0.1 or 0.2 seconds
Pulse relay configures when to energise - on vehicle detection or when the vehicle leaves the loop
Sensitivity boost sets the undetect level to maximum sensitivity to prevent loss of detection of high-bed vehicles
8 x switch selectable sensitivity settings are available providing flexible configuration
2 x switch selectable frequency settings are available to prevent cross-talk between adjacent loops
Filter option provides a delay between vehicle detection and switching of the output relay - usually used to prevent false detection of small or fast-moving objects

Provides a high level of safety and security for even the fastest doors and parking boom gates
Microprocessor and surface mount technology allows a large number of functions to be incorporated into a small device
Eight sensitivity settings and automatic sensitivity boost offer the ability to detect small cars and high bed trucks
Permanent presence option ensures vehicle detection will be maintained when the vehicle is parked over the loop for extended periods.
Easily installed into small spaces.

	LD113B & LD213B Compact Loop Detectors
Power Requirement	10 – 50 VDC 60 mA 8 – 35v VAC 50/60Hz
Presence / Pulse relay	0.5A/220VAC
Indicators	LED indicators show: Power, Detect state and Loop Fault
Detector Tuning Range	15 – 1500 uH
Frequency	Two step adjustable 23—130kHz
Sensitivity Settings	1 – 0.01 % HIGH 2 – 0.02 % 3 – 0.05 % 4 – 0.1 % 5 – 0.2 % 6 – 0.5 % 7 – 1 % 8 – 2 % LOW
Protection	Loop isolation transformer, zener diode and gas discharge tube
Environmental Tracking	Automatic compensation
Response Time	120ms after vehicle enters the loop
Connector	LD 113B: 10Way Screw terminal LD 213B: 14Way Screw terminal
Operating Temperature	-20°C to 70° C