Goods Hoists | In Shaft Get latest price

Read more...

To contact Southwell Lifts & Hoists about Goods Hoists | In Shaft use Get a quote.

The Goods Hoists | In Shaft can be fitted to a lift shaft built to specifications for support and to enable access and installation.

Benefits of Goods Hoists | In Shaft

• Cost effective alternative to a traditional lift
• Ideal for sites with poor access for installation
• Shaft can be designed to blend into the surrounding structures for applications where presentation is important
• Minimal pit & overrun requirements
• Low maintenance costs
• Self diagnostic programmable logic control (PLC)

Options for Goods Hoists | In Shaft

• Walls and roof on platform - load protected during use
• Roller shutters or gates on platform - load fully enclosed during use
• Platform finishes - industrial enamel, 2 pack epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl.
• Doors - aluminium with viewing panel, steel, stainless steel, fire rated roller shutters, continuous rated door motors, swing doors fire rated swing doors.
• Doors same sides, opposite sides or 90 degrees
• Additional doors for double entry / exit of hoist
• 2 level, 3 level or 4 level
• Fabricated steel ramp when pit is not possible
• 12 metres per minute lift speed
• Twin mast self supporting units where no shaft structure is available
• Custom configurations & capacities available on request

All Southwell Goods Hoists | In Shaft exceed the design and safety standard requirements of the Australian Standards and all OH&S regulations.

Main Dimensions for Goods Hoists | In Shaft

• Goods Hoists | In Shaft SGH-0909
  • Platform (l x w) - 0.9m x 0.9m
  • Capacity (kg) - 350
  • Enclosure Length (mm) - 970
  • Enclosure Width (mm) - 1400
  • Pit Depth (mm) - 90
• Goods Hoists | In Shaft SGH-1515
  • Platform (l x w) - 1.5m x 1.5m
  • Capacity (kg) - 1500
  • Enclosure Length (mm) - 1540
  • Enclosure Width (mm) - 2000
  • Pit Depth (mm) - 125
• Goods Hoists | In Shaft SGH-2018
  • Platform (l x w) - 2.0m x 1.8m
  • Capacity (kg) - 1000
  • Enclosure Length (mm) - 2040
  • Enclosure Width (mm) - 2300
  • Pit Depth (mm) - 125
• Goods Hoists | In Shaft SGH-2418
  • Platform (l x w) - 2.4m x 1.8m
  • Capacity (kg) - 1000
  • Enclosure Length (mm) - 2440
  • Enclosure Width (mm) - 2300
  • Pit Depth (mm) - 125
• Goods Hoists | In Shaft SGH-2424
  • Platform (l x w) - 2.4m x 2.4m
  • Capacity (kg) - 1500
  • Enclosure Length (mm) - 2440
  • Enclosure Width (mm) - 3000
  • Pit Depth (mm) - 195
• Goods Hoists | In Shaft SGH-3024
  • Platform (l x w) - 3.0m x 2.4m
  • Capacity (kg) - 2000
  • Enclosure Length (mm) - 3040
  • Enclosure Width (mm) - 3000
  • Pit Depth (mm) - 195

Warranty for Goods Hoists | In Shaft

3 years full warranty and 10 year structural warranty (subject to service agreement with Southwell Lifts & Hoists)

Read less...

To contact Southwell Lifts & Hoists about Goods Hoists | In Shaft use Get a quote.