Vogelsang Lobe Pumps
Lobe pumps can also run dry (running without any liquid) for long periods without damage. Even the mechanical seal will last a long time in a normal or dry run condition as it has a barrier fluid that is kept under pressure and this good lubricating fluid lubricates the seal faces rather than the dirty pumped liquid which is typical in a normal Mono type pump.
With a standard Mono type pump the mechanical seal is lubricated by the pump liquid and this liquid is often very dirty and does not have good lubricating properties. In the condition where the pump is dry running for a standard Mono type pump the seal will overheat as there is no liquid lubricating and cooling down the seal faces. Worse still is that the stator and rotor will heat up very quickly and burn out which can mean both stator, rotor and mechanical seal will need to be replaced which can be very expensive and costly.
Features:
Specifications:
Sizes: | 1 to 16 inch |
Flow Rates: | Up to 1000 m3/hr) |
Pressure: | Up to 12 Bar (1200 kPa) |
Materials | Nitrile, Stainless steel, Viton, EPDM, many other options |
Suction: | Excellent suction lift ability!! |
Solids: | Excellent |
Viscosity: | 1-200,000 |
To contact Pump Power Australia about Vogelsang Lobe Pumps use Get a quote.
Lobe pumps can also run dry (running without any liquid) for long periods without damage. Even the mechanical seal will last a long time in a normal or dry run condition as it has a barrier fluid that is kept under pressure and this good lubricating fluid lubricates the seal faces rather than the dirty pumped liquid which is typical in a normal Mono type pump.
With a standard Mono type pump the mechanical seal is lubricated by the pump liquid and this liquid is often very dirty and does not have good lubricating properties. In the condition where the pump is dry running for a standard Mono type pump the seal will overheat as there is no liquid lubricating and cooling down the seal faces. Worse still is that the stator and rotor will heat up very quickly and burn out which can mean both stator, rotor and mechanical seal will need to be replaced which can be very expensive and costly.
Features:
Specifications:
Sizes: | 1 to 16 inch |
Flow Rates: | Up to 1000 m3/hr) |
Pressure: | Up to 12 Bar (1200 kPa) |
Materials | Nitrile, Stainless steel, Viton, EPDM, many other options |
Suction: | Excellent suction lift ability!! |
Solids: | Excellent |
Viscosity: | 1-200,000 |
To contact Pump Power Australia about Vogelsang Lobe Pumps use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product