Under Floor Induction Unit |BID Get latest price

Read more...

To contact TROX Australia about Under Floor Induction Unit |BID use Get a quote.

Under floor induction unit in nominal lengths of 900 to 1500 mm, with horizontal heat exchanger. Underfloor induction unit with 2-pipe or 4-pipe heat exchanger for installation in raised floors

• High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
• High comfort levels due to low airflow velocity in the occupied zone
• Four nozzle variants to optimise induction based on demand
• Levelling feet
• Continuous linear arrangement if required

Optional equipment and accessories

• Control equipment
• Choice of walk-on floor grille from our portfolio
• Heat exchanger powder-coated black
• Powder coating in many different colours, e.g. RAL CLASSIC         

Application

• Underfloor induction units of Type BID for installation in raised floors
• Under floor induction units allow for floor-to-ceiling glazing
• 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
• Energy-efficient solution since water is used for heating and cooling

Special characteristics

• Supply air discharge as inducing displacement flow
• Horizontal heat exchanger as 2-pipe or 4-pipe system
• 4 levelling feet
• Water connections at the narrow side, Ø12 mm Cu pipe, with plain tails or with G½" external thread, or with a G½" union nut; with flat seal

Nominal length

• 900, 1050, 1200, 1350, 1500 mm

Variants

• E: Single unit
• B: Unit for continuous linear arrangement, i.e. open at the narrow sides

Heat exchanger

• 2: 2-pipe systems
• 4: 4-pipe systems

Nozzle variants

• M: Medium
• G: Large
• U: Extra large
• 2U: Two nozzle rows, extra large nozzles

Construction

• Galvanised
• P1: Powder-coated RAL 9005, black, or in any other RAL colour, gloss level 70 %

Attachments

• Water connection A1: G½" external thread and flat seal
• Water connection A2: G½" union nut and flat seal

Useful additions

• Connecting hoses
• Control equipment consisting of a control panel including a controller with integral room temperature sensor; valves and valve actuators; and lockshields
• Choice of floor grille from our portfolio
• X-AIRCONTROL control system

Construction features

• Spigot is suitable for circular ducts to EN 1506 or EN 13180
• Four nozzle variants to optimise induction based on demand
• Recess for floor grille
• Vent valves on the heat exchanger

Materials and surfaces

• Casing, nozzle plate and primary air plenum made of galvanised sheet steel
• Heat exchanger with copper tubes and aluminium fins
• Exposed surfaces either untreated or powder-coated in any RAL colour, e.g. RAL 9005, black
• Heat exchanger also in black (RAL 9005)

Standards and guidelines

• Products are certified by Eurovent (no. 09.12.432) and listed on the Eurovent website
• Declaration of hygiene conformity to VDI 6022

Maintenance

• No moving parts, hence low maintenance
• The heat exchanger can be vacuumed with an industrial vacuum cleaner if necessary
• VDI 6022, Part 1, applies (Hygiene requirements for ventilation and air-conditioning systems and units)

Read less...

To contact TROX Australia about Under Floor Induction Unit |BID use Get a quote.