Induction Unit for Suspended Ceiling Type DID312 Get latest price

Read more...

To contact TROX Australia about Induction Unit for Suspended Ceiling Type DID312 use Get a quote.

Induction Unit for Suspended Ceiling are active chilled beam with two-way air discharge, 300 mm nominal width, vertical heat exchanger and condensate drip tray.

Features

• Preferably for room heights up to 4.00 m
• High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
• High comfort levels due to low airflow velocity in the occupied zone
• Three nozzle variants to optimise induction based on demand
• Hinged, removable induced air grille in four designs

Optional equipment and accessories

• Control system
• Additional casing for extract air
• Heat exchanger powder-coated black
• Powder coating in many different colours, e.g. RAL CLASSIC

Application

• Active chilled beams of Type DID312 for the integration into various ceiling systems, preferably for room heights up to 4.00 m
• The vertical heat exchangers and the condensate drip tray are useful if the temperature temporarily falls below the dew point.
• 2-pipe or 4-pipe heat exchangers enable good comfort levels with a low conditioned primary air volume flow rate
• Energy-efficient solution since water is used for heating and cooling

Special characteristics

• The vertical heat exchanger with condensate drip tray is useful if the temperature temporarily falls below the dew point
• Hinged, removable induced air grille in four designs
• Heat exchanger as 2-pipe or 4-pipe system
• Internal nozzle plate with punched nozzles (non-combustible)
• Water connection at the narrow side, Ø12 mm Cu pipe, either with plain tails or with G½" external thread and flat seal

Nominal sizes

• 900, 1200, 1500, 1800, 2100, 2400, 2700, 3000 mm

Read less...

To contact TROX Australia about Induction Unit for Suspended Ceiling Type DID312 use Get a quote.