Thunder Laser CO2 Laser Cutting Machine ...

Thunder Laser - CO2 Laser Cutting Machine | Nova63

Supplier: Thunder Laser Australia

CO2 Laser Cutting Machine | Nova63

The right choice for large format CO2 laser cutting machines

24 Recent Views In Stock

Standard Features

Hybrid Servo Motor
- 1000mm/s speed for engraving photo, super smooth vector cutting quality.
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Laser Software
- RDWorksV8 laser software.
LCD panel
- Set speed, power, and more directly from the LCD panel.
Auto Focus
- Help the user to set focus Easier. (based on motorized table)
Motorised table
- Control the table up/down from LCD panel directly
Honey Comb Table
- Reduces underside reflections.
Aluminum Blade Cutting Table
- Reduce the influence of the reflection of laser.
3D Engrave
- Engrave high quality 3D photos directly.
3D Cutting
- Achieve “3D cutting” on some materials
Connection Ways
- High-speed Ethernet line or the USB cable line.
USB Disk Interface
- Thunder laser system supports the USB disk loading.
Visible Red Dot Pointer
- Make the laser beam “visible”.
High Quality Laser Tube
- Every laser tube must pass the strict quality control test.
High Quality Optics
Mirror Mount
- Thunderlaser easily re-adjusting 3D mirror mounts.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Open Flap Protection
- Laser will stop working if you open the front cover.
Water Protection
- Laser will stop working if the water cooling system is not working
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Standard Laser Head
- It is the most often used head.
Air Assist
- Blowing air to prevent the material being burned
Low Noise Cooling Fan
- Operate the laser in a quiet and comfortable surroundings.
High Quality Rails
- Keep the engraving/cutting precise and very durable.
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.
Water Chiller
- keep the temperature to ensure the stability of laser working.
Air Assist
- Blowing air to prevent the material being burned.

Technical Specifications

Laser System		NOVA 63
Laser Tube Wattage		100-130Watt
Work Area		1600x1000mm(63.0″x39.4″)
Max Part Size (WxLxH)	Front door closed	1700x1130x230mm(66.9″ x 44.5″ x9.0″)
	Pass-through door	1700x∞x20mm(66.9″ x ∞” x0.8″)
Table Size		1700x1130mm(66.9″ x 44.5″)
Z Axis Height		230mm(9.1″)
Dimensions(WxDxH)		2200x1505x1040mm(86.6″ x 59.3″ x40.9″)
Net Weight		470kgs(1036lbs)
Laser Type		Sealed Co2 Glass Laser Tube
Cooling		Water Cooled
Motion Control System		High-Speed Hybrid servo motor
Maximum Speed		1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Resolution(DPI)		User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows XP/2000/Vista/7/8/10
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements		110 to 240 volts, 50 or 60 Hz, single phase
Ventilation System		Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.

To contact Thunder Laser Australia about Thunder Laser CO2 Laser Cutting Machine | Nova63 use Get a quote.

Standard Features

Hybrid Servo Motor
- 1000mm/s speed for engraving photo, super smooth vector cutting quality.
Smart Board
- Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Laser Software
- RDWorksV8 laser software.
LCD panel
- Set speed, power, and more directly from the LCD panel.
Auto Focus
- Help the user to set focus Easier. (based on motorized table)
Motorised table
- Control the table up/down from LCD panel directly
Honey Comb Table
- Reduces underside reflections.
Aluminum Blade Cutting Table
- Reduce the influence of the reflection of laser.
3D Engrave
- Engrave high quality 3D photos directly.
3D Cutting
- Achieve “3D cutting” on some materials
Connection Ways
- High-speed Ethernet line or the USB cable line.
USB Disk Interface
- Thunder laser system supports the USB disk loading.
Visible Red Dot Pointer
- Make the laser beam “visible”.
High Quality Laser Tube
- Every laser tube must pass the strict quality control test.
High Quality Optics
Mirror Mount
- Thunderlaser easily re-adjusting 3D mirror mounts.
Emergency Stop
- Turn off the machine immediately when there is an accident.
Open Flap Protection
- Laser will stop working if you open the front cover.
Water Protection
- Laser will stop working if the water cooling system is not working
Alarm Lamp
- Show the work state and tell when the job is done, more safe for you.
Standard Laser Head
- It is the most often used head.
Air Assist
- Blowing air to prevent the material being burned
Low Noise Cooling Fan
- Operate the laser in a quiet and comfortable surroundings.
High Quality Rails
- Keep the engraving/cutting precise and very durable.
Exhaust System
- Ensure the work pieces and laser cutter machine inside be clean.
Water Chiller
- keep the temperature to ensure the stability of laser working.
Air Assist
- Blowing air to prevent the material being burned.

Technical Specifications

Laser System		NOVA 63
Laser Tube Wattage		100-130Watt
Work Area		1600x1000mm(63.0″x39.4″)
Max Part Size (WxLxH)	Front door closed	1700x1130x230mm(66.9″ x 44.5″ x9.0″)
	Pass-through door	1700x∞x20mm(66.9″ x ∞” x0.8″)
Table Size		1700x1130mm(66.9″ x 44.5″)
Z Axis Height		230mm(9.1″)
Dimensions(WxDxH)		2200x1505x1040mm(86.6″ x 59.3″ x40.9″)
Net Weight		470kgs(1036lbs)
Laser Type		Sealed Co2 Glass Laser Tube
Cooling		Water Cooled
Motion Control System		High-Speed Hybrid servo motor
Maximum Speed		1000mm/S(39.4 IPS)
Speed and Power Control (engraving depth)		Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
Operating Modes		Optimized raster, vector, and combined mode
Resolution(DPI)		User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head)
Computer Interface		Ethernet and USB Connection
Compatible Operating Systems		Windows XP/2000/Vista/7/8/10
Buffer Memory		128MB Standard
Display Panel		3.5″ LCD panel showing current file, total working time, laser power, speed etc.
Electrical Requirements		110 to 240 volts, 50 or 60 Hz, single phase
Ventilation System		Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.