| MODEL | MDX-50 | |
|---|---|---|
| Acceptable materials* | Resins such as chemical wood and modeling wax (metal not supported) | |
| Operating range | X: 400mm (15.80in) Y: 305mm (12.00in) Z: 135mm (5.315in) |
|
| Table size | W: 400mm (15.80in) D: 305mm (12.00in) |
|
| Loadable workpiece size | X: 400mm (15.80in) Y: 305mm (12.00in) Z: 100mm (3.90in) |
|
| Axis drive | Stepper Motor | |
| Feed rate | XY: 7 to 3600mm/min (0.3in to 141.7 in/min) Z: 7 to 3000 mm/min (0.3 to 118.1 in/min) |
|
| Software resolution | RML-1: 0.001 mm/step NC code: 0.001 mm/step | |
| Mechanical resolution | 0.01 mm/step (0.39 mil/step; half step) |
|
| Spindle motor | Brushless DC motor | |
| Spindle rotation speed | 4500 ~ 15000 rpm | |
| Tool chuck | Collet | |
| Tool Change Method | AutomaticTool Changer (ATC) | |
| ATC Magazine Capacity | ||
| 5 Tools + 1 Detection pin (6 Position Capacity) | ||
| Tool Shank Diameter | 6.35, 3.175mm (0.250in, 0.125in) |
|
| Operating noise | During operation | |
| Dust box dimmensions | 600 x 700 x 95mm (23.62 x 27.65 x 3.74in) |
|
| Interface | USB | |
| Power requirements (VAC/A) | AC 100 to 240 V ±10%, 50/60 Hz, 1.2 A (Overvoltage Category: II, IEC 60664-1) |
|
| Power consumption (W) | ≈ 95W | |
| Acoustic noise level (dB) | No-load operation: | 60 dB (A) or less |
| Standby: | 45 dB (A) or less | |
| External Dimensions | Width X Depth x Height: | 29.92 × 35.43 × 28.82 in (760 × 900 × 732 mm ) |
| Weight | 122kg (269lb) | |
| Installation environment | Indoor use at altitudes | Up to 2000 m (6500ft) |
| Temperature | 5 to 40°C (41 to 104°F) | |
| Humidity | 35 to 80%RH (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, USB cable, manual, Roland DG Software Package CD, detection pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool positioner, Z0 sensor |
|
