McKEECO - Small Log System Get latest price

Depending on log volume a chipper canter and sawing head rig is all that is needed in conjunction with a board edger for edging the sideboards. The larger diameter logs are fed through the saw centre a number of times.

CENTERING INFEED CONVEYOR

The centering infeed conveyer rotates the log to the desired cutting position, centres and holds the log.

HEADRIG

The headrig can be either a sawing only or a reducing sawing unit. The reducing unit contains two chipper discs. The centre line sharp chain extends through the reducer / sawing section.

OUTFEED SEPARATOR

The outfeed separator is for separating the sideboards from the centre cant. An overhead spiky wheel holds the centre onto the sharp chain. Sidepress rolls hold the sideboards whilst the log is still in the cut. Hourglass rollers separate the sideboards from the centre cant after cutting.

To contact McKEECO General Engineering about McKEECO Small Log System use Get a quote.

Depending on log volume a chipper canter and sawing head rig is all that is needed in conjunction with a board edger for edging the sideboards. The larger diameter logs are fed through the saw centre a number of times.

CENTERING INFEED CONVEYOR

The centering infeed conveyer rotates the log to the desired cutting position, centres and holds the log.

HEADRIG

The headrig can be either a sawing only or a reducing sawing unit. The reducing unit contains two chipper discs. The centre line sharp chain extends through the reducer / sawing section.

OUTFEED SEPARATOR

The outfeed separator is for separating the sideboards from the centre cant. An overhead spiky wheel holds the centre onto the sharp chain. Sidepress rolls hold the sideboards whilst the log is still in the cut. Hourglass rollers separate the sideboards from the centre cant after cutting.

Read less...

To contact McKEECO General Engineering about McKEECO Small Log System use Get a quote.