JetBlack Walk-through Personnel Cleaning ...
If you have employees moving between dusty work areas to clean-zones, the installation of a JetBlack Walk-through Personnel Cleaning Booth will allow them to quickly and safely remove residue dust, powder or contaminant from all PPE and work-wear clothing.
JetBlack Personnel Cleaning Booths are self-contained de-dusting systems which are guaranteed to meet or exceed OHS requirements. Walk-through booths can be conveniently situated at entry/exit points - this option is available on both the Standard and Hands-free booths.
JetBlack Personnel Cleaning Booths are electric and use no compressed air – contaminated workers can continuously enter and exit the unit without having to wait for a compressor tank to re-fill. It is a completely safe alternative to using compressed air (read more about Why Compressed Air is Dangerous) and is much easier to use than alternative vacuum systems.
It operates by utilising high-velocity, low-pressure air, which is effective in dislodging powders, dust and fibres effectively and safely from clothing and skin, even when directed at exposed skin. All dust and fibres are drawn down and away through the floor by an extractor system and collected either in a HEPA extractor or vented directly into your existing exhaust system.
Key Features
What's Included
Typical Environments Include
Specifications
Stand-alone cyclone extractor option
Motor Power: | 1.5kW |
Airflow performance: | 1600m3/hr (12 air changes) |
Input current: | 1Phase, 230V, 50Hz as standard |
Filter: | Supplied with HEPA H14 polyester cartridge filter, plastic collection bag, and heavy duty impeller. Automatic filter cleaning for consistent performance. Filter cartridge captures 99% of dust from 0.2 – 2 microns in size. |
Noise level: | Low 74dB(A) @ 3m |
Extractor fan unit option
Where an existing extractor system is installed we can offer a powerful centrifugal extraction fan unit. Note: NO filtration system is supplied with this option
Motor Power: | 1.1kW |
Airflow performance: | 1500m3/hr |
Input current: | 1 or 3 Phase, with a range of voltages available |
Filter: | None supplied |
Ducting: | Additional ducting can be supplied |
General specifications
Net weight: |
219kg with extractor |
Dimensions (of main unit) L x W x H: |
1554 x 1810 x 2233mm with extractor 1472 x 1200 x 2233mm without extractor |
Location: | Fixed |
To contact Dynamic Engineering Australia about JetBlack Walk-through Personnel Cleaning Booth use Get a quote.
If you have employees moving between dusty work areas to clean-zones, the installation of a JetBlack Walk-through Personnel Cleaning Booth will allow them to quickly and safely remove residue dust, powder or contaminant from all PPE and work-wear clothing.
JetBlack Personnel Cleaning Booths are self-contained de-dusting systems which are guaranteed to meet or exceed OHS requirements. Walk-through booths can be conveniently situated at entry/exit points - this option is available on both the Standard and Hands-free booths.
JetBlack Personnel Cleaning Booths are electric and use no compressed air – contaminated workers can continuously enter and exit the unit without having to wait for a compressor tank to re-fill. It is a completely safe alternative to using compressed air (read more about Why Compressed Air is Dangerous) and is much easier to use than alternative vacuum systems.
It operates by utilising high-velocity, low-pressure air, which is effective in dislodging powders, dust and fibres effectively and safely from clothing and skin, even when directed at exposed skin. All dust and fibres are drawn down and away through the floor by an extractor system and collected either in a HEPA extractor or vented directly into your existing exhaust system.
Key Features
What's Included
Typical Environments Include
Specifications
Stand-alone cyclone extractor option
Motor Power: | 1.5kW |
Airflow performance: | 1600m3/hr (12 air changes) |
Input current: | 1Phase, 230V, 50Hz as standard |
Filter: | Supplied with HEPA H14 polyester cartridge filter, plastic collection bag, and heavy duty impeller. Automatic filter cleaning for consistent performance. Filter cartridge captures 99% of dust from 0.2 – 2 microns in size. |
Noise level: | Low 74dB(A) @ 3m |
Extractor fan unit option
Where an existing extractor system is installed we can offer a powerful centrifugal extraction fan unit. Note: NO filtration system is supplied with this option
Motor Power: | 1.1kW |
Airflow performance: | 1500m3/hr |
Input current: | 1 or 3 Phase, with a range of voltages available |
Filter: | None supplied |
Ducting: | Additional ducting can be supplied |
General specifications
Net weight: |
219kg with extractor |
Dimensions (of main unit) L x W x H: |
1554 x 1810 x 2233mm with extractor 1472 x 1200 x 2233mm without extractor |
Location: | Fixed |
To contact Dynamic Engineering Australia about JetBlack Walk-through Personnel Cleaning Booth use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product