Fieldpiece Dual Port Manometer | SDMN6

Fieldpiece - Dual Port Manometer | SDMN6

Dual Port Manometer | SDMN6

Do More with the Pressures You Need with this Industry Exclusive Manometer

In Stock

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches on your truck.

Features of this product

Gas, static, and differential pressure
Test pressure switches
Easily calibrate any adjustable pressure switch
Great for diagnosing furnace performance

Specifications of this product

Operating environment: 32°F to 118°F (0°C to 48°C) at <80% RH
Storage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed)
Power: 9V, NEDA 1604A, IEC 6LR61 9V alkaline battery.
Battery life (alkaline): 200 hours (manometer only, backlight off), 12 hours (pressure switch testing @ 27% pump speed, BL off, approx -2.5"WC induced pressure w/o pump bleed accessory)
Auto power off (APO): 15 minutes
Units of Measure: inWC, mmWC, mbar, psi
Resolution: 0.01 inWC
Overrange: “OL” or “-OL” is displayed
Max Pressure: 900inWC (17.4psi) will damage sensors
Compatible media: Dry, non-corrosive gases
Pressure ports: 2 connectors (P1, P2) for flexible tubing (4.5mm to 8mm ID)
Pump port: 1 connector (PUMP) for 5mm (~3/16 inch) ID flexible tubing
Lead jacks: 2 banana plug jacks for testing open/close switch status (continuity between terminals)
Accuracy: Stated accuracy at 0 to 50°C (32 to122°F): ±1.5% FS
Accuracy and ranges: inWC: ±0.02 on 0.00 to ±2.00 (±1.5% FS on 2.00 to ±60.0); mmWC: ±0.5 on 0.00 to ±51.0 (±1.5% FS on 51.0 to ±1500); mbar: ±0.05 on 0.00 to ±5.00 (±1.5% FS on 5.00 to ±150.0); psi: ±0.001 on 0.000 to ±0.07 (±1.5% FS on 0.07 to ±2.000)

To contact Fieldpiece Australia about Fieldpiece Dual Port Manometer | SDMN6 use Get a quote.

Features of this product

Gas, static, and differential pressure
Test pressure switches
Easily calibrate any adjustable pressure switch
Great for diagnosing furnace performance

Specifications of this product

Operating environment: 32°F to 118°F (0°C to 48°C) at <80% RH
Storage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed)
Power: 9V, NEDA 1604A, IEC 6LR61 9V alkaline battery.
Battery life (alkaline): 200 hours (manometer only, backlight off), 12 hours (pressure switch testing @ 27% pump speed, BL off, approx -2.5"WC induced pressure w/o pump bleed accessory)
Auto power off (APO): 15 minutes
Units of Measure: inWC, mmWC, mbar, psi
Resolution: 0.01 inWC
Overrange: “OL” or “-OL” is displayed
Max Pressure: 900inWC (17.4psi) will damage sensors
Compatible media: Dry, non-corrosive gases
Pressure ports: 2 connectors (P1, P2) for flexible tubing (4.5mm to 8mm ID)
Pump port: 1 connector (PUMP) for 5mm (~3/16 inch) ID flexible tubing
Lead jacks: 2 banana plug jacks for testing open/close switch status (continuity between terminals)
Accuracy: Stated accuracy at 0 to 50°C (32 to122°F): ±1.5% FS
Accuracy and ranges: inWC: ±0.02 on 0.00 to ±2.00 (±1.5% FS on 2.00 to ±60.0); mmWC: ±0.5 on 0.00 to ±51.0 (±1.5% FS on 51.0 to ±1500); mbar: ±0.05 on 0.00 to ±5.00 (±1.5% FS on 5.00 to ±150.0); psi: ±0.001 on 0.000 to ±0.07 (±1.5% FS on 0.07 to ±2.000)