Elevating Work Platform | VST Range | ...

Elevating Work Platform | VST Range | VST40-I

Supplier: Aerial Access Australia

VST40-I from Aerial Access Australia

One of the most popular Versalift models, the VST40-I has proved to be 30% more productive in tree work than a knuckle boom configuration.

50 Recent Views Call for more details

They are also much safer because of their flight pattern.

The combination of lower boom and telescopic upper boom allows an operator better access through the branch structure and or power lines.

Torsion bars fitted to the vehicle mean that outriggers are not required to stabilise the working platform on slopes up to five degrees – thus increasing the ability to operate without disrupting vehicle flow or needing additional traffic control measures.

Its compliance with AS/NZS 1418.10:2011 to 66kV means safety for operators close to high and low voltage powerlines. Its “wet” rating ability enables it to be deployed in rainy weather or storm emergencies.

VST40-I (Rear mount)

Working Height 13.7m
Height to bottom of bucket 12.2m
Horizontal Outreach 9.14m
Max bucket capacity 272 kg
Side mounted telescopic upper boom for low stowed platform
Extremely low maintenance with non-lube bearings used at all points of motion
Minimal road overhang
Ability to telescope out from lower boom at rest giving a superior flight path, enabling reach under low obstacles
90° lower boom articulation means the EWP can work safer and more effectively close to conductors
Low weight and compact design allows better access in urban areas
Bucket rotation through 180° for ease of positioning
Bucket capacities to 272 kg
Optional material handler capacity to 360 kg
Patented ELECTROGARD (protection for operator and allows full retraction whilst maintaining insulation rating)
Radio remote control is available

Vehicle requirements:

The minimum vehicle GVM required for mounting the VST40-I in the rear mount position is 12,000kg.

For further details please phone 1300 654 591

To contact Aerial Access Australia about Elevating Work Platform | VST Range | VST40-I use Get a quote.

They are also much safer because of their flight pattern.

The combination of lower boom and telescopic upper boom allows an operator better access through the branch structure and or power lines.

VST40-I (Rear mount)

Working Height 13.7m
Height to bottom of bucket 12.2m
Horizontal Outreach 9.14m
Max bucket capacity 272 kg
Side mounted telescopic upper boom for low stowed platform
Extremely low maintenance with non-lube bearings used at all points of motion
Minimal road overhang
Ability to telescope out from lower boom at rest giving a superior flight path, enabling reach under low obstacles
90° lower boom articulation means the EWP can work safer and more effectively close to conductors
Low weight and compact design allows better access in urban areas
Bucket rotation through 180° for ease of positioning
Bucket capacities to 272 kg
Optional material handler capacity to 360 kg
Patented ELECTROGARD (protection for operator and allows full retraction whilst maintaining insulation rating)
Radio remote control is available