Allegro Allegro Breathing Air Blower
While our Breathing Air Blower improves the worker’s safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low maintenance unit includes a removable and washable filter and is contained in a rugged roto-molded plastic housing for longer lasting durability.
MOTOR/CONSTRUCTION:
• 220V, 50/60 Hz
• 2.2A
• CFM output regulated by panel mounted speed control
• Exterior manifold to allow for the use of multi-air lines (single/double)
• Roto-molded, rugged double wall housing
• Unit is self-contained and requires little maintenance (exception of removable, washable filter)
• No Plug
WARNING:
Our PN 9815-EFE Breathing Air Blower must be placed in clean, Grade “D” breathable air (as specified by 29 CFR 1910).
NOTES:
• Contributing factors to the output temperature include, but are not limited to: length of the hose, ambient temperature, and outside temperature where the hose is placed. Also, please remember that a small temperature difference of 3° F to 10° F (2° C to 6° C) is very significant when the air is blowing directly onto the user’s face and into breathing passages.
• Does NOT add heat to the breathing air
• Flow meter is included to verify NIOSH flow setting for mask & hoods
To contact OTB Products about Allegro Allegro Breathing Air Blower use Get a quote.
While our Breathing Air Blower improves the worker’s safety and comfort, it also helps reduce their frequency and duration of breaks on the job. This self-contained, low maintenance unit includes a removable and washable filter and is contained in a rugged roto-molded plastic housing for longer lasting durability.
MOTOR/CONSTRUCTION:
• 220V, 50/60 Hz
• 2.2A
• CFM output regulated by panel mounted speed control
• Exterior manifold to allow for the use of multi-air lines (single/double)
• Roto-molded, rugged double wall housing
• Unit is self-contained and requires little maintenance (exception of removable, washable filter)
• No Plug
WARNING:
Our PN 9815-EFE Breathing Air Blower must be placed in clean, Grade “D” breathable air (as specified by 29 CFR 1910).
NOTES:
• Contributing factors to the output temperature include, but are not limited to: length of the hose, ambient temperature, and outside temperature where the hose is placed. Also, please remember that a small temperature difference of 3° F to 10° F (2° C to 6° C) is very significant when the air is blowing directly onto the user’s face and into breathing passages.
• Does NOT add heat to the breathing air
• Flow meter is included to verify NIOSH flow setting for mask & hoods
To contact OTB Products about Allegro Allegro Breathing Air Blower use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product