AIS Salt Water Chlorinator | Chrome 30T

AIS - Salt Water Chlorinator | Chrome 30T Price Guide: $1,752

Supplier: Mr Pool Man

Salt Water Chlorinator | Chrome 30T

AutoChlor CHROME salt water chlorine generators deliver the perfect combination of contemporary good looks with advanced, in-line, water disinfection for home swimming pools.

In Stock

Using the same award-winning technology that has made AutoChlor one of Australia’s most well-known and trusted brands, pool owners now have the luxury of choosing the AutoChlor CHROME model that best suits their needs
AND budget.

Features

Reverse Polarity (RP) technology – meaning the chlorinator periodically switches between positive and negative charge resulting in less calcium build up and less maintenance.
Circuit breaker – designed to protect your pool system in the event of a power surge or overload.
Pump output socket – 240 volt supplied to synchronise your chlorinator and pool pump.
Warning indicator lights – for easy and safe operation.
Chlorine controller and output indicator
4 year Warranty
Australian made
30gram per hour
50,000 - 80,000L pools

Salt Water Chlorinator Installation Overview:

Installing a salt water chlorinator is an interesting DIY project which just requires a bit of elbow grease and familiarity with some basic tools.

For NEW salt water chlorinator installations:

Raise the salt levels in your pool to the recommended levels and allow to circulate for at least 8 hours. Don’t forget to balance your water.
Turn off all power to your pool and close off any valves after your pump.
Measure off area for salt cell installation with included template.
Measure again.
With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories.
Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual.
Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required.

For more information on converting your regular pool to a salt water pool, you can check out our extensive guide here. (Don’t worry, it will open in a new window)

For REPLACEMENT salt water chlorinator installations:

Turn off all power to your pool and close off any valves after your pump.
Measure off area for salt cell installation with included template. If your new salt cell is shorter than your current salt cell, you may need to install new pipes from your pump or heater.
If your new salt cell is longer than your current one, then no problem, simply measure again.
With a hand saw, cut off area, smooth the edges with sandpaper and attach the included unions and plumbing accessories.
Remove the old power box / control box.
Mount the power box / control box on the wall and attach all of the wires and leads as per the user manual.
Open up all the valves and turn on the pump to allow water to enter the cell. Turn on your power box / control box and apply any settings as required.

To contact Mr Pool Man about AIS Salt Water Chlorinator | Chrome 30T use Get a quote.