Advanced Warehouse Solutions Drive-in ...

Advanced Warehouse Solutions - Drive-in Pallet Racking

Drive-in Pallet Racking

The Drive-In Pallet Racking system is a continuous block of racking, not divided by aisles. These systems provide a first-in-last-out stock rotation and are designed to maximise storage capacity, while minimising the use of floor space.

16 Recent Views In Stock

Drive-In and Drive-Through Racking are storage rack configurations that allow the forklift to drive directly into the lane of stacked rows (called a bay).

The difference between a drive-in and a drive-through pallet rack system is simply whether the bays have an entry at only one end, or at both ends.

Drive-in rack systems use a common entry and exit, while drive-thru systems have entry points at either end of the bay.

Because a Drive-In racking system has only one entrance, it uses what is called a LIFO (last in, first out) storage method. With only one entrance, the last pallet put into a row is necessarily the first one to be taken out.

A drive-through storage system, with two different entry points, can also use a FIFO (first in, first out) storage method. With a FIFO system, pallets are loaded in one end and are pushed back to the other end, where they are then at the front of the row on the opposite side. The first pallet put into such a row is the first one taken out at the other end. This system is advantageous for material with an expiration date or wherever shelf life is a major concern.

The following racking systems are also available:

A Frame Racking
Cantilever Racking
Double Deep Pallet Racking
Drum / Cable Racking
Narrow Isle Pallet Racking
Selective Pallet Racking
Tyre Racking
Customised Racking

*Note: Pallet Racking products are not available through our online store. Please contact us about your requirements.

To contact Advanced Warehouse Solutions about Advanced Warehouse Solutions Drive-in Pallet Racking use Get a quote.

Drive-In and Drive-Through Racking are storage rack configurations that allow the forklift to drive directly into the lane of stacked rows (called a bay).

The difference between a drive-in and a drive-through pallet rack system is simply whether the bays have an entry at only one end, or at both ends.

Drive-in rack systems use a common entry and exit, while drive-thru systems have entry points at either end of the bay.

The following racking systems are also available: