Wood-Mizer - Industrial Twin Blade Board Edger Machine | EG400 Get latest price

Read more...

To contact Wood-Mizer Australia about Wood-Mizer Industrial Twin Blade Board Edger Machine | EG400 use Get a quote.

The EG400 is a rugged board edger that is at home in commercial sawing businesses that require a fast, accurate, and heavy-duty board edger. The EG400 edges material 700mm wide by 100mm high at 30 metres per minute, and smaller material at up to 54 metres per minute.

The EG400 is a rugged board edger that is at home behind industrial headrigs or other applications requiring a fast, accurate heavy-duty board edger. Capable of processing material up to 914 mm wide and 101 mm thick, it is equipped with an automatic variable speed feed that is set by the thickness of the piece being edged. The 30HP is powerful enough to rip through thick hardwoods, but not big enough to break your energy budget. Two 406 mm inserted carbide teeth blades are mounted on a splined shaft and move in and out from center, allowing the use of an optional board tailer. Two lasers are included as standard equipment on the EG400, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers.

Specifications:

Power Selections

• Power Selections 22kW electric

Cutting Capacities

• Max Width of Cut 72cm (28")
• Min Width of Cut 76 mm (3")
• Max. Material Thickness 100mm (4")

Blade

• Blade Speed (RPM) 2320 RPM
• Number of Blades 2
• Blade Diameter 400 mm (16")
• Blade Kerf 7 mm (9/32")
• Blade Adjustment Method Electric
• Blade position Two Centered Blades

Feed System & Operation

• Feed Speed 100mm (4") material: 13m/min (44 Ft/Min)
• 50mm (2") material: 24m/min (78 Ft/Min)
• 25mm (1") material: 34m/min (111 Ft/Min)
• Board Reverse System Reverses feed rollers to eject jams
• Board Kickback Prevention Anti Kick-back fingers
• Board Alignment 2 Lasers
• Material Hold-down Powered Steel Rollers
• Operator Controls Stationary Control Station
• Setworks Optional Setworks
• Feed System Rubber Infeed & Outfeed Belts
• Options Heavy-duty outfeed tailer

Machine Dimensions & Requirements

• Width 1.6 m (64")
• Electrical Requirements 400V 50Hz 3Ph 70A
• Safety Standards CE

Read less...

To contact Wood-Mizer Australia about Wood-Mizer Industrial Twin Blade Board Edger Machine | EG400 use Get a quote.