It comprises 88 LEDs [light emitting diodes] in four independent circuits, is powered from 77-137VDC and is supplied in a surface mount enclosure with an IP65 weatherproof rating
High intensity LED’s with a 15 degree view angle up & down the side of the vehicle and 45 degree across the platform
Available in blue
Constant light, flashing or turned off
Ambient light sensor to automatically adjust light intensity for reduced intensity at night and greater light output during daytime.
Nominal 120 [77-137VDC]
Plastic housing from random co-polymer polypropylene with 1% uv stabiliser
Approved to C tick
Low cost - High performance
Applications includes rail vehicles
The LEDGBL warning light is an advanced instrument that have been designed and manufactured to stringent specifications. It has been designed to reject electrical interference that normally abounds in industrial environments.
The light is intended to shine up and down the side of the train as well as across the platform. It has an array of 88 high contrast light emitting diodes (LEDs). Sixty four LEDS with a light emission angle of 15 degrees and twenty four with a light emission angle of 45 degrees. The LEDs are arranged in 4 independent circuits in three planes (2 rows of 22 in a horizontal band) so that the loss of one led will not cause total loss of light in one face. The LEDS are driven by a pulse width modulated current control circuit.
-40 to 75 degrees Celsius
0-90% RH non-condensing
Connection Details for the Power Supply
Terminal 1: 120VDC active supply (flying lead marked with red heat sink)
Terminal 2: 0VDC supply (flying lead unmarked)
(Supplied in H&S 1.5mm GKWAX cable)
Connection Details for the control Interface
Core 1: Internal 0VDC (marked with black heat shrink)
Core 2: Light on off control line (marked with yellow heat shrink
Core 3: Constant light or flash at one hertz (marked with blue heat shrink)
(Supplied in H&S (Supplied in H&S 12 556 636 cable)
Current consumption is 140mA @ 120VDC
Switch mode power supply with input protection
LEDGBL is 300grams
Surface mounting plastic enclosure (random co-polymer polypropylene with 1% UV stabilisation) ,stainless steel mounting plate and silicon foam gasket of case dimensions 85mm wide flange by 174mm long, a body height of 60mm with fixing centres of 48mm wide by 140mm high using an 8mm hole. It is supplied with Torx security mounting screws.
Innovec Controls | Process Instrumentation IndustrySearch Trusted Supplier
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel interlock on a CNG Vehicle, LED lighting for trains & trams, we can supply.
We also solve unusual applications by Bespoke design to your specific requirements.
We manufacture in Australia and supply quality and reliable instrumentation to the world market.