The LED marker light comprises 84 LEDs [light emitting diodes] as 42 red and 42 white) supplied in a surface mount enclosure with an IP65 weatherproof rating when installed.
High intensity LED’s with a 15 degree view angle
Led failure detection
Every first led white with every second led red (other colours available)
110VDC supply (55 to 154VDC)
Low cost - High performance
Application is for marker light on railway rolling stock
Compliant to EN50155 (pending)
The LEDMLD84 marker light is an advanced instrument that have been designed and manufactured to stringent specifications.
The light includes led module, polycarbonate window and flying leads terminated in 3 way Wago connectors.
An array of 84 high contrast light emitting diodes (LED) with a light emission angle of 15 degrees for each LED arranged as 42 red and 42 white. This is to give a red and white marker light in the one enclosure. The LED’s are arranged in 14 independent circuits so the loss of one led will not stop the light from functioning. The MTBF mean time between failures is 60,000 hours operation minimum.
-40 to 75 degrees Celsius
0-90% RH non-condensing
Terminal 1: 55VDC to 154VDC active supply for the red LEDs
Terminal 2: 0VDC supply for the red LEDs
Terminal 3: Red led alarm relay common contact
Terminal 4: Red led alarm relay normally open contact
Terminal 4:Ground supply marked green/yellow
Terminal 6: white led alarm relay normally open contact
Terminal 7: white led alarm relay common open contact
Terminal 8: 0VDC supply for the white LEDs
Terminal 9: 55 to 154VDC active supply for the white LEDs
Wiring is accomplished using Huber & Suhner 4GKW-AX-1.5mm2
55VDC to 154VDC. Other voltages on request
Current consumption is 120mA @ 110VDC
Inrush current of 200mA for 80 micro seconds. The current flowing through each LED is controlled by a closed loop feedback circuit. This ensures constant brightness independent of power supply voltage
The power supply to the light is protected by a power conditioning circuit which includes voltage spike removal to ensure compliancy with EN50121/EN50155.
Reverse polarity protection (reverse connection will not cause any damage).
Material of manufacture
Housing is metal spun 1.5mm aluminium bright clear anodised
Window is 2mm Makrolon polycarbonate
The light is sealed with Sika Firesil Marine N
All screws are 304 grade stainless steel
Cable entry gland is IP68
The light output has been set at 120 Candela for the red and white LEDs at one metre. (Measured in a test rig with our Nata tested light meter).
Two year back to base warranty
LEDMLD84 is 300grams
Panel mounting clear anodised aluminium enclosure of case dimensions 110mm diameter by 85mm deep.
Sample number for red/white marker light: LEDMLD/84/120/110VDC
Innovec Controls | Process Instrumentation IndustrySearch Trusted Supplier
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel interlock on a CNG Vehicle, LED lighting for trains & trams, we can supply.
We also solve unusual applications by Bespoke design to your specific requirements.
We manufacture in Australia and supply quality and reliable instrumentation to the world market.