Environdata uses five volt pulses as its signal so that, even in less than ideal conditions, the recorder will easily identify the pulses. In fact, with a five volt pulse, even one whole volt of electrical noise or contact resistance or cable loss will still result in a reliable signal (count of the pulses). (Compare this with the previous example where an analogue signal of one volt represents twenty degrees).
Each Environdata sensor incorporates its own signal conditioner that converts the low level signal sensed into five volt pulses. Further to this, each signal conditioner is calibrated to compensate for changes in the calibration of the sensing element.
The result is that all Environdata sensors of a particular model are directly interchangeable, without the need to alter any programming in the weather recorder. This makes field replacement by on-site staff reliable and easy to do.
Easy and Reliable to Test
Environdata’s sensors are easier to test because a simple test box (available from Environdata) will show if pulses are being sent or not. Measurement of analogue voltages and investigating cable signal losses are never required.
True Signal Representation
The Environdata sensors continuously respond to the sensing element by changing their pulse rate. This means the recorder receives a true average of the signal over the sampling period and enhances the reliability of the data recorded.
Increase of Resolution with Time
Whereas the analogue sensing method cannot provide an improved resolution over time, Environdata’s pulse counting method does result in better resolution as the counts increase over a longer period (10 minutes, one hour or even daily).
Easy to add new Sensors
Environdata’s Weather Recorders consist of a number of equivalent pulse counting channels. This means any combination of extra sensors can be added (provided there were enough inputs allowed for originally) or any combination of sensors can be re-configured.
In general, Environdata’s sensor methods result in more reliable signals and better recorded data. Environdata systems are more easily maintained, even in harsh environments, and this can be done by less technical personnel.
Environdata Weather Stations Pty Ltd specialises in the design, manufacture and sales of automatic weather stations and their associated software and hardware. Environdata also supplies and maintains remote communications equipment for these systems, so that a complete environmental monitoring solution can be supplied.
Environdata has been operating since 1982 and has built its reputation on providing the highest level of support all its customers, for the life of their equipment. Customers are seen as long term partners, and it is this long-term commitment by Environdata that has ensured that customers return.
Environdata’s technical service department ensures that all products can be upgraded, serviced, recalibrated and repaired. Customers support services are seen as equally important, and free telephone and email support is provided for the life of the equipment.
In Australia, Environdata also provides on-site repair and re-calibration to customers on an annual basis. Once, most weather station customers would have sent their weather stations or sensors in for service. Now, Environdata operates a fully mobile on-site service unit.