This line of vibrators is characterised by high centrifugal force, constant speed and increased wear resistance which makes it suitable even for the most consistent types of concrete and for continuous use.
The shaft is supported by four bearings for extra heavy-duty work requirements.
EWO Electric High Frequency Internal Vibrators, which are directly connected with the mains supply at 230 V, 50/60 Hz, consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.
A small electronic converter, complete with switch, is integrated into the power cable.
The inverter is housed in a sturdy, dust-tight, waterproof (IP 66) aluminium casing. It is protected against overload, overvoltage, excess temperature and short circuits.
A led signals with different colours accurate functioning or the presence of a fault. Each colour corresponds to a specific fault.
All electronic components are covered with a resin so as to protect them from vibration, humidity and any shock.
High Frequency Internal Vibrators With Built-In Converter.
Highly increased compacting capacity enables quick removal of air bubbles without any segregation of the elements composing the mass. The result is mechanically strong, durable and homogeneous concrete strength. The comprehensive range satisfies the requirements of both private and civil engineering sector.
Head diameter: 38 ~ 65 mm (1.5 ~ 2.5 in).
Amplitude: 1.2 ~ 3 mm (0.04 ~ 0.1 in).
Efficiency diameter: 45 ~ 110 mm (1.7 ~ 4.3 in).
Nominal frequency: 12,000 vib/min.
Centrifugal force: 1,700 N ~ 7,330 N.
Lightweight (3 kg).
Tropicalised electronic panel.
Ambient temperature: -20 ~ 40 °C (-4 ~ 104 °F).
Exclusive sealing system.
Hardening treatment for EWO38C; chrome plating for EWO50C, EWO59C, EWO65C.
Vibration needle head protection class IP68.
Easy to handle.
Oli Vibrators Pty Ltd | Industrial High Quality Vibrating Equipment IndustrySearch Trusted Supplier
Oli Vibrators focuses on supplying the material handling, construction and mining industries with electric and pneumatic vibrators and flow aids, including the largest range of electric vibrators used in the mining industry, through to the smallest material handling products used throughout industry.
Oli Vibrators Pty Ltd is proud to showcase their incomparable range of off the shelf Vibrators and Flow Aids to the wider Australian market.
Extensive knowledge of Vibration Technology on a global level, has qualified Oli Vibrators as the undisputed specialists in this diverse Australian market.
In most cases Oli Vibrators can deliver within 24 to 48 hours so no more waiting for your ship to come in after 3 months downtime.
Oli Vibrators mission is to provide our customers with the highest quality products, unbeatable service at the very best price.