Waterjet - Waterjet CNC Cutting Machines Get latest price

Read more...

To contact Ron Mack Machinery Australia Pty Ltd about Waterjet Waterjet CNC Cutting Machines use Get a quote.

Waterjet CNC Cutting machines by Waterjet Corporation. Cantilever PRIMA & SUMPREMA plus Gantry CLASSICA & PRACTICA machines proudly manufactured in Italy available in Australia at Ron Mack Machinery.

Waterjet Prima & Practica Flying Bridge Series

PRIMA LT 510 - Integrated Cantilever System

• 3 Axis NC Flying Bridge technology with Integrated Tank
• Ball Screw and rack and pinion motion system with automatic lubrication
• Inner table working area of 3670x1850mm, Cutting Area (X,Y,Z): 3050x1550x180mm

PRIMA LT 44 - Compact and Portable System

• 3 Axis Flying Bridge technology with Integrated Tank
• Ball Screws motion system with automatic lubrication and integrated electrical cabinet
• Inner table working area of 1500x1520mm, Cutting Area (X,Y,Z): 1250x1250x180mm

PRATICA FB 510 - Flying Bridge Technology

• Separate Stainless Steel Tank with Ball Screws motion system and automatic lubrication
• 3 axis Numerical Control System
• Inner table working area of 3650x2240mm, Cutting Area (X,Y,Z): 3050x2000x180mm

PRATICA FBR 510 - Revolving Flying Bridge System

• Double table with automatic revolving Flying Bridge system which allows an easy and safe material loading and offloading without any interruption of the cutting process

Waterjet Classica Gantry Series

CLASSICA CL 510 - 3 Axis Technology

• Stainless Steel Tank
• 3 axis NC gantry technology with helical rack and pinion motion system and automatic lubrication
• Inner table working area of 3675x2100mm, Cutting Area (X,Y,Z): 3400x1800x180mm

CLASSICA CL 612/D2 - Double Independent Bridge

• Stainless Steel Tank
• 3 axis NC gantry technology with helical rack and pinion motion system and automatic lubrication
• Inner table working area of 2300x4400mm, Cutting Area (X,Y,Z): 2000x3000x180mm

Waterjet Suprema 5-Axis Gantry Series

SUPREMA DX 510 - 4 AXIS SYSTEM WITH I.T.C. TECHNOLOGY

• 5 axis 2D "Edge 5" option with I.T.C Technology, Touch Probe, Laser Pointer and Vacuum Assist
• Separate Stainless Steel Tank and Ball Screw motion system with automatic lubrication
• Inner table working area of 3600x1850mm, Cutting Area (X,Y,Z): 3350x1600x180mm

4 AXIS I.T.C. TECHNOLOGY (INTELLIGENT TAPER CONTROL)

The I.T.C. System compensates for the natural taper that is produced by the water jet while cutting. The I.T.C. enables the operator to enhance the squareness of the cut material, top to bottom, while allowing highest possible cutting feed rates. The water jet position is compensated up to 2 degrees, via the NC control of the motion system. This ensures a high quality part at low cost.

During the I.T.C. compensation, the jet is also directed towards the piece in order to reduce the "Tail Delay" effect as well as the accelleration-deceleration ramp times around the corners, for faster and more economical cutting cycles.

Read less...

To contact Ron Mack Machinery Australia Pty Ltd about Waterjet Waterjet CNC Cutting Machines use Get a quote.