Single & Dual Channel Rail Mount Loop ...

Single & Dual Channel Rail Mount Loop Isolators | 9600 Series

Instrotech's single and dual channel isolators are fully code compliant, made of flame retardant plastic and come with a full three-year warranty.

112 Recent Views In Stock

These 0-30mA instruments are available as single or dual isolators in one 92 x 92 x 26mm wide package, and have galvanic isolation in excess of 1,000 volts between input and output.

Model 9600-B1 has a single isolator in the rail mount housing, while Model 9600-B2 has dual isolators fitted into the same housing.

The dual unit may be used to isolate 2 separate loops or to provide 2 isolated loop outputs from a single loop input.

Surface-mount electronics and transformer isolation make for an economical high-performance design with high accuracy and low transmission and linearity errors.

The volt drop is less than 4 volts into the maximum 500-ohm output load.

Instrotech loop isolators are CE and C-Tick EMC / EMI compliant and have a 3 year factory material and workmanship warranty.

Model 9600-B1 Features:

DIN rail mount 92 x 92 x 26 mm enclosure
UL 94 V-0 flame retardant plastic
Low cost - high performance design
Loop powered - no additional power supply required
0 - 30mA input current
Galvanic isolation between input and output >1000V
Less than 0.25% transmission error and linearity error
CE and C-Tick EMC and EMI compliant
3 year guarantee
View Brochure Here

Model 9600-B2 Features:

DIN rail mount 92 x 92 x 26 mm enclosure
UL 94 V-0 flame retardant plastic
Low cost - high performance design
Loop powered - no additional power supply required
0 - 30mA input current
Galvanic isolation between input and output >1000V
Less than 0.25% transmission error and linearity error
2 loop isolators in the same enclosure
CE and C-Tick EMC and EMI compliant
3 year guarantee
View Brochure Here

SPECIAL OFFER FOR INDUSTRYSEARCH BUYERS

Instrotech Australia is running a limited time promotion, take advantage of a 30% discount with free nationwide delivery.

Be quick, don't miss out on this limited time deal. To learn more please call or use the enquiry email for a direct reply.

To contact Instrotech Australia about Single & Dual Channel Rail Mount Loop Isolators | 9600 Series use Get a quote.

These 0-30mA instruments are available as single or dual isolators in one 92 x 92 x 26mm wide package, and have galvanic isolation in excess of 1,000 volts between input and output.

Model 9600-B1 has a single isolator in the rail mount housing, while Model 9600-B2 has dual isolators fitted into the same housing.

The dual unit may be used to isolate 2 separate loops or to provide 2 isolated loop outputs from a single loop input.

Surface-mount electronics and transformer isolation make for an economical high-performance design with high accuracy and low transmission and linearity errors.

The volt drop is less than 4 volts into the maximum 500-ohm output load.

Instrotech loop isolators are CE and C-Tick EMC / EMI compliant and have a 3 year factory material and workmanship warranty.

Model 9600-B1 Features:

DIN rail mount 92 x 92 x 26 mm enclosure
UL 94 V-0 flame retardant plastic
Low cost - high performance design
Loop powered - no additional power supply required
0 - 30mA input current
Galvanic isolation between input and output >1000V
Less than 0.25% transmission error and linearity error
CE and C-Tick EMC and EMI compliant
3 year guarantee
View Brochure Here

Model 9600-B2 Features:

DIN rail mount 92 x 92 x 26 mm enclosure
UL 94 V-0 flame retardant plastic
Low cost - high performance design
Loop powered - no additional power supply required
0 - 30mA input current
Galvanic isolation between input and output >1000V
Less than 0.25% transmission error and linearity error
2 loop isolators in the same enclosure
CE and C-Tick EMC and EMI compliant
3 year guarantee
View Brochure Here

SPECIAL OFFER FOR INDUSTRYSEARCH BUYERS

Instrotech Australia is running a limited time promotion, take advantage of a 30% discount with free nationwide delivery.

Be quick, don't miss out on this limited time deal. To learn more please call or use the enquiry email for a direct reply.

Read less...

To contact Instrotech Australia about Single & Dual Channel Rail Mount Loop Isolators | 9600 Series use Get a quote.

Let Instrotech Australia provide you with a quote

Supplier

Get a quote

Supplier: Instrotech Australia

Distribution: Australia wide

Location: Rostrevor, SA

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Instrotech Australia are also proudly displaying these credentials:

Established:

1993

Employees:

1-5

Distribution:

Australia wide

Location:

Rostrevor , SA

Joined:

May 2017

Level:

Standard Storefront