Regulated Power Supply | 2.5A D.C. Get latest price

Model 2053

D.C. Regulated Power Supply available in any fixed voltage from 5 volts to 28 volts. The regulator is temperature limited and time dependant current limited.

This power supply incorporates a toriodal transformer which gives a low weight and small size. Other advantages are low external field and elimination of lamination hum.

Mains Input Variation: The power supply can be used at full output down to an input voltage of 210 Volts, however at low input voltages (below 240 volts) the output ripple will increase if the output current exceeds 2.5 X [mains input voltage-200]/40. The Model 2053-20 will give full output performance for input voltages from 200 to 245 Volts. Above 245 Volts the power supply can be used at full rated output however the maximum ambient temperature must be reduced by [mains input voltage-245] x 1 degrees celcius per volt. The input volts should not exceed 255V.

Non-standard Voltages: These power supplies are available for non-standard voltages.

Mounting: For maximum power out mount with the longest dimension vertical. Do not obstruct airflow.

To contact Dyne Industries about Regulated Power Supply | 2.5A D.C. use Get a quote.

Model 2053

D.C. Regulated Power Supply available in any fixed voltage from 5 volts to 28 volts. The regulator is temperature limited and time dependant current limited.

This power supply incorporates a toriodal transformer which gives a low weight and small size. Other advantages are low external field and elimination of lamination hum.

Mains Input Variation: The power supply can be used at full output down to an input voltage of 210 Volts, however at low input voltages (below 240 volts) the output ripple will increase if the output current exceeds 2.5 X [mains input voltage-200]/40. The Model 2053-20 will give full output performance for input voltages from 200 to 245 Volts. Above 245 Volts the power supply can be used at full rated output however the maximum ambient temperature must be reduced by [mains input voltage-245] x 1 degrees celcius per volt. The input volts should not exceed 255V.

Non-standard Voltages: These power supplies are available for non-standard voltages.

Mounting: For maximum power out mount with the longest dimension vertical. Do not obstruct airflow.

Read less...

To contact Dyne Industries about Regulated Power Supply | 2.5A D.C. use Get a quote.