Professional Force/Torque Testers Indicator ...

Professional Force/Torque Testers Indicator Model 7i | MARK-10

Supplier: IDM Instruments

Professional Force / Torque Indicator Model 7i

Professional Force / Torque Indicator Model 7i mounted to the AC1008 table top mounting kit with a series R50 torque sensor (sold separately)

Professional Force / Torque Indicator Model 7i Display

Mesure Lite Software

The 7i professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors.

28 Recent Views In Stock

The 7i professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators.

The 7i features a blazingly fast sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. In addition to the 5i indicator's functions, the 7i features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The 7i also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection.

The 7i interfaces with Mark-10 motorized test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included MESUR™ Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator’s memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Interchangeable force and torque sensors through Plug & Test™ technology (sensors are sold separately)
Sensor password protection, for preventing use of an unauthorized sensor
Password protection for individual keys and calibration
High-speed 14,000 Hz sampling rate
Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
Individual data point memory for up to 5,000 readings, downloadable to a PC
USB, RS-232, Mitutoyo, and analog outputs
Sample break detection with auto functions, including stopping movement of a Mark-10 motorized test stand
Automatic output / data storage / zeroing upon various event completions
1st / 2nd peak detection
5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name
Programmable footswitch command string
Programmable set points, with indicators and outputs
Averaging mode - calculates average readings over time
External trigger mode - for switch contact testing or remotely stopping display update
Password protection, configurable for individual keys and calibration

The 7i indicator features several functions typically found in more complex instruments, such as materials testers, data acquisition systems, and PLCs. The following unique features are highlighted:

High Speed Data Capture & Storage

Series 7 can capture and store up to 5,000 continuous data points at a rate of up to 14,000 readings per second. This unique function is ideal for capturing switch activation forces, sharp breaks, and other short-duration applications. Configurable start and stop triggers are provided. The data acquisition rate is variable and can be slowed to also capture longer events, such as structure relaxation, material expansion, and others. Data from the storage buffer can be exported to data collection software such as MESUR™gauge for further analysis and graphing. Using a Series 7 gauge could replace cumbersome and expensive data acquisition hardware and software.

Footswitch Command String

Integrate your footswitch / automation system with a Series 7 gauge to improve testing ergonomics and efficiency; no need for multiple key presses. Up to three steps may be programmed for a single footswitch activation. Select from several commands, including request peak reading, zero the display, save to memory, and others. Time delays can be inserted between each step.

Automatic Data Output / Save / Zero / I/O Pin Toggle

Upon completion of several event types, the Series 7 can perform the following productivity-enhancing functions:

Automatically save the peak reading to memory.
Transmit the peak reading via USB, RS-232, or Mitutoyo output.
Zero the display. Toggle an I/O pin, for example to stop movement of an ESM303 test stand.

Applicable events include:

Sample break detection (also applicable to samples which slip, click, or otherwise reach a peak, then fall).
Completion of an averaging sequence.
External trigger (ex. switch activation).
1st / 2nd peak capture (ex. tensile testing).

User-defined Unit of Measurement

Series 7 gauges display 6 standard units of measurement. One additional user-defined unit is provided for unique applications. A base unit is specified, along with a multiplier, and 5-character name. Typical applications:

To measure the torque produced by pressing on a lever in a mechanical assembly, configure the multiplier based on the length of the lever, thereby converting a unit such as N into Ncm.
To measure the pressure produced by a circular compression plate on a foam sample, configure the multiplier based on the area of the plate, thereby converting a unit such as lbF into psi.


Accuracy:		±0.1% of full scale
Sampling rate:		14,000 Hz
Power:		AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery life:		Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Outputs:		USB / RS-232: Configurable up to 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC, ±0.25% of full scale at capacity, General purpose: Three open drain outputs, one input. Set points: Three open drain lines.
Safe overload:		150% of full scale (display shows “OVER” at 110% and above)
Weight:		0.7 lb (0.3 kg)
Included items:		Carrying case with chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user’s guide), and certificate of calibration. If ordered with a sensor, a NIST-traceable certificate of calibration for the set (indicator + sensor) can be supplied upon request, at no additional charge.
Environmental requirements:		40 - 100°F, max. 96% humidity, non-condensating
Warranty:		3 years (see individual statement for further details)



R01 S-beam force sensors, tension and compression	R02 Miniature button force sensors, compression only	R03 Inline force sensors, tension and compression



R04 Miniature S-beam force sensors, tension and compression	R05 Fully enclosed smart sensors, push and pull	R06 Wire crimp pull sensor, tension only

R50
Universal torque sensors

R51
Universal torque sensors with interchangeable attachments

R52
Tool calibration torque sensors

R53
Closure torque sensors

R55
Fully enclosed smart sensors, push and pull


		Table top stand Includes mounting holes for bench mounting and angle adjustment.
		MESUR™gauge software - tabulates and plots load vs. time or load vs. travel. Also calculates statistics, exports to Excel, and more.
		Upgrade to Plug & Test™ Upgrade service replaces BGI style connector with 7i/5i/3i Plug & Test™ connector.
		Output cables Send test data to a PC, statistical printer, or other data collector for further analysis.

To contact IDM Instruments about Professional Force/Torque Testers Indicator Model 7i | MARK-10 use Get a quote.

Interchangeable force and torque sensors through Plug & Test™ technology (sensors are sold separately)
Sensor password protection, for preventing use of an unauthorized sensor
Password protection for individual keys and calibration
High-speed 14,000 Hz sampling rate
Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
Individual data point memory for up to 5,000 readings, downloadable to a PC
USB, RS-232, Mitutoyo, and analog outputs
Sample break detection with auto functions, including stopping movement of a Mark-10 motorized test stand
Automatic output / data storage / zeroing upon various event completions
1st / 2nd peak detection
5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name
Programmable footswitch command string
Programmable set points, with indicators and outputs
Averaging mode - calculates average readings over time
External trigger mode - for switch contact testing or remotely stopping display update
Password protection, configurable for individual keys and calibration