Optically Enhanced Weapon Orientation ...
OptoWOM-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any environment. With the addition of optical image tracking the system is now able to mount directly to a device under measure, and with one known reference direction, can be turned on and operated immediately without any magnetic calibration whatsoever.
During operation, the device’s magnetometer calibrations are able to be derived on-the-fly allowing for the device to operate with both optical and magnetic heading determination. OptoWOM-II works through the use of reference images. A reference image is literally a picture of the horizon in a given direction. Within the reference image the system identifies a constellation of identifiable features.
Then, from any subsequent image collected by the camera, heading is determined by comparing those images back to the most appropriate reference. As long as the system can identify 20% of the features of a previously collected reference, it can provide an accurate assessment of the change in Additionally, when the system is operating with good optical data, it uses the information it collects to continuously check results against magnetic heading information and dynamically calibrates the device against magnetic interferences present in the application.
• Hybrid Inertial Weapon Orientation System
• Real-time optical and inertial sensors weapon
• Optically Enhanced, Gyro-Stabilized Slaved
• Advanced, extendable, embedded Kalman Filter based sensor fusion algorithms
• Embedded calibration on hard and soft iron
• All solid state components (no moving parts)
• Full temperature calibration of all sensing elements
• Environmentally sealed (IP67)
OptoWOM-II offered by Bestech is a compact, reliable, low power, light weight, and affordable tactical North seeking and North keeping device, which is developing as alternative Azimuth solution to expensive and high power DTG, FOG, HRG or RLG based Gyrocompasses. OptoWOM-II as a hybrid inertial and optical Azimuth and Elevation measuring solution eliminates large errors inherent with classical Digital Magnetic Compass technology. For more information, please contact Bestech Australia on 03 9540 5100.
To contact Bestech Australia about Optically Enhanced Weapon Orientation Module OptoWOM-II | Bestech use Get a quote.
OptoWOM-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any environment. With the addition of optical image tracking the system is now able to mount directly to a device under measure, and with one known reference direction, can be turned on and operated immediately without any magnetic calibration whatsoever.
During operation, the device’s magnetometer calibrations are able to be derived on-the-fly allowing for the device to operate with both optical and magnetic heading determination. OptoWOM-II works through the use of reference images. A reference image is literally a picture of the horizon in a given direction. Within the reference image the system identifies a constellation of identifiable features.
Then, from any subsequent image collected by the camera, heading is determined by comparing those images back to the most appropriate reference. As long as the system can identify 20% of the features of a previously collected reference, it can provide an accurate assessment of the change in Additionally, when the system is operating with good optical data, it uses the information it collects to continuously check results against magnetic heading information and dynamically calibrates the device against magnetic interferences present in the application.
• Hybrid Inertial Weapon Orientation System
• Real-time optical and inertial sensors weapon
• Optically Enhanced, Gyro-Stabilized Slaved
• Advanced, extendable, embedded Kalman Filter based sensor fusion algorithms
• Embedded calibration on hard and soft iron
• All solid state components (no moving parts)
• Full temperature calibration of all sensing elements
• Environmentally sealed (IP67)
OptoWOM-II offered by Bestech is a compact, reliable, low power, light weight, and affordable tactical North seeking and North keeping device, which is developing as alternative Azimuth solution to expensive and high power DTG, FOG, HRG or RLG based Gyrocompasses. OptoWOM-II as a hybrid inertial and optical Azimuth and Elevation measuring solution eliminates large errors inherent with classical Digital Magnetic Compass technology. For more information, please contact Bestech Australia on 03 9540 5100.
To contact Bestech Australia about Optically Enhanced Weapon Orientation Module OptoWOM-II | Bestech use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product