DEPRAG - NANOMAT Screwdrivers Get latest price

Read more...

To contact Assembly Technologies Pty Ltd about DEPRAG NANOMAT Screwdrivers use Get a quote.

These screwdrivers are perfect for the accurate assembly of small screws in the 8Nmm to 300Nmm (0.008 to 0.3Nm) torque range.

The NANOMAT® - Screwdriver with the lowest torque capability available anywhere on the market for your micro assemblies.

• In the Medical Industry for the process reliable assembly of hearing aids and pacemakers
• In the watch making industry
• In the Optical Industry for the assembly of eye-glasses, lenses, cameras or microscopes
• For the assembly small consumer electronics and components, such as cell phones, calculators, game consoles, PCs
• In the Precision Engineering for the production of measuring instruments

Extreme small torques of 8Nmm to 300Nmm at speeds of 300 to 1400 rpm/min are accurately achieved - and that with four different speed ranges.

The use of the NANOMAT® Screwdriver has many advantages:

• Highly accurate shut-off clutch
  • The high torque-accuracy is achieved by the proven principle of the DEPRAG disengagement- and shut-off clutch. This special clutch design enables our Screwdrivers to reach extreme high torque accuracy, in many cases below +/- 3 % of the standard deviation, which is kept constant over several million of cycles. DEPRAG air-operated Screwdrivers with a shut-off clutch DEPRAG at suitable surrounding conditions a Cmk value of =1.67 at a +/-10% tolerance based on 6 Sigma according to ISO 5393. A Cmk value of 1.67 means that there is a failure rate of only 0.6 per one million screw assemblies.
• Standardised, extreme slender design
  • Due to its extreme small size, the smallest hole-pattern that we can access with two side-by-side mounted stationary Screwdrivers is 12-mm
• Ergonomic housing design
  • For a sensitive and precise guidance of the screwdriver
• Integrated quick-change-chuck
  • Allows fast and simple bit-change
• Can be attached to a DEPRAG Screwfeeder
  • for the Ergonomic handling of the smallest connection elements
• ESD-execution
  • for the dissipation of electrostatic charges
• Drive size is designed to accept standard bits with 3-mm drive according to DIN 3126
  • The use of standard bits is a huge advantage through cost-saving and fast availability
• Clutch can be adjusted externally
  • The torque can be adjusted from the outside within a very short time without the need for special tools.
• Uniform length
  • The uniform length of all gear-stages, allow for a simple integration.
• Proven DEPRAG guide-bolt system for machine mount drivers
  • features an "axial spring load" that regulates the optimum screw end-load pressure.
• Allows screw-suction by integrated vacuum port
  • There are no interfering vacuum-hoses in the housing area.

Read less...

To contact Assembly Technologies Pty Ltd about DEPRAG NANOMAT Screwdrivers use Get a quote.