Innovec | Quad Setpoint Controller | IDA4 PLC Get latest price

Input Details

• The instrument has a bipolar differential input. To realise the accuracy a temperature compensated band gap reference is used in the ratio metric measurement system. The standard instrument is set for 4-20mA and 0-10VDC operation. Other ranges of are available. Please consult the factory.

Outputs

• Four switch point relays are provided with form C (changeover) contacts rated at five (5) amperes 240VAC resistive.
• Each output can be configured as active high, active low with hysteresis or control alarm [output configured to be active between high and low set points].

Display

• The IDA4 has a 4.5 digit 10mm character height high contrast light emitting diode (LED) display with a viewing distance of 3 metres with programmable intensity.

Decimal Point

• The decimal point position is programmed from the front panel.

Environmental Parameters

• 0-70 degrees Celsius
• 0-90% rh non-condensing

Instrument Power Supply

• 120/240VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 40VDC.

Transducer Power Supply

• A 24VDC at 30mA transducer power supply.

Weight

• 400 grams

Mounting Details

• Din rail mounting enclosure 100 mm wide by 75 mm high by 110 mm deep.

Configuration of the Instrument

• This is a digital instrument and the display intensity, decimal points, input range, relays on and off switch points and hysteresis are programmed by the front touch buttons and the values are stored in eeprom for 10 years.

Ordering Information

• Model number configured as: Model/input signal/display units/power supply/options
• Sample number: IDA4/4-20mA/0-100.00/VAC
• All units shipped factory calibrated to 4-20mA equals 0-100.00 unless specified