Sepro - Industrial Robots | S7 Line - 7X Line Get latest price

Read more...

To contact Mitchell Industries about Sepro Industrial Robots | S7 Line - 7X Line use Get a quote.

Sepro is the specialist in the automation of 700 to 5000 T injection molding machines.

Our large robots offer is designed around a unique technological platform of the latest generation to meet the most varied production requirements, such as yours.

From the 3-axis robot to the 5-axis robot, there is a solution for all your new or existing press equipment needs, for simple unloading or complex applications or for optimum adaptation to the most demanding applications.

S7 Line and 7X Line benefit from the latest generation technologies of the new Sepro large capacity robot platform:

• A high level of component reliability due to shared designs and components with high technological value: Sepro Linear System (SLS) guides on transverse and vertical axes and powerful servo-motors on all our models.
• Rationalization of basic components and a modular design for adapting the installation (transverse or axial, etc.), with strokes and loads tailored closely to your application needs.
• A modular assembly planned during the design phase for demolding and vertical arm functions which allow for preassembly in our factory and testing by module.
• Robot programming and operation is simple and flexible using Visual, Sepro’s native control platform.

DESIGN AND STRENGTH

In terms of their design, S7 Line and 7X Line robots are stable and fast in order to optimize installation productivity during operation, 24/7.

• A vertical arm with aluminum profiles, provides an excellent mass/rigidity ratio and design optimized for high performance. The S7-45, S7-55, 7X-45 and 7X-55 models are designed without balancing cylinder. The intelligent servo control and brake, reduces noise, maintenance operations and power consumption (compressed air and electricity).
• S7-45, S7-55, 7X-45 and 7X-55 robots have a closed frame demolding structure made of aluminum profiles for high rigidity and low moving masses. S7-75 and 7X-100 XL have a single-beam, large section demolding structure to ensure stability and a long demolding stroke. For the demolding axis, the prismatic guide represents the optimal cost/rigidity solution.

AXIAL INSTALLATION

The choice of an axial installation on the large IMM optimizes the use of available floor space in your workshop:

• Three IMMs instead of two over the same floor area (50% more IMM on average).
• The flow of parts is directly at the end of the IMM: no need for a conveyor between the IMMs.
• The available space between the IMMs is reserved for operator access and preparing the molds for a quick change of production.

VISUAL 2

It’s so easy

• 3D Display: With the Simple Pick-and-Place Module: create your cycle by answering the questions the system asks you and see the result immediately in 3D on the video.
• Fine-tuning movements in the mold made easy thanks to the joystick.

Make your daily routine easier

• You can consult the full-screen documentation at any time.
• Transfer information from one team to another using the notepad function.
• Thanks to the USB key, operators, setters, programmers and maintenance personnel have direct access to the relevant data.
• Troubleshooting assistance from Sepro’s Hotline : with the USB key, download and send the relevant information via internet for remote assistance.

Tried and tested ergonomics

• Task-based navigation means you can directly access the job to be done.
• Eco Mode: after having programmed your cycle, you just need to press one key to reduce power consumption during the cycle.

VISUAL 3

The assurance of high performance and simplicity

A perfect solution for the most complex automation systems with up to 16 axes.

• The standard Path Tracking function, as standard, can be used to demold undercut parts following curved paths, flame treat parts or cut sprues using simple, economical tooling systems
• Thanks to the fast 20 ms PLC function, you can check intelligent peripheral systems, such as a camera to determine the position of a part, as well as external CNC axes.
• Use the Software studio on your PC to create, edit and manage your programs in a Windows environment. The robot’s programs and data can be centralized via your company’s IT network (TCP/IP Ethernet cable or Wifi as an option).
• The Digital vacuum switch is available as standard on Visual 3 to program and save your part grip settings for each mold.

Read less...

To contact Mitchell Industries about Sepro Industrial Robots | S7 Line - 7X Line use Get a quote.