Hughes Portable Interim Eye / Face Wash ...
The H-STD45GM portable safety eye/face wash is designed as a quick response, first-aid device for use where a plumbed-in unit is not available and must therefore be backed up by a method of further decontamination.
This unit is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe; it is then easily maneuvered to its required position, either by hand, or by fitting an ‘A’ frame (optional) and hooking up to a standard tow ball on a vehicle.
The wheel centres on the optional trolley can be adjusted to enable the unit to be taken through a standard door opening allowing it to be used in laboratories and work rooms etc.
The 114 litre carbon steel cylinder is polypropylene lined to avoid internal corrosion. The exterior is painted with acid resistant white enamel paint and fitted with pictogram ‘Emergency Shower’ signs to International Standard ISO 3864-1 and green and white safety stripes.
Note: Suitable for temporary use and capable of delivering a flush of water for over 1 ½ minutes.
Weight | 80 kg |
---|---|
Dimensions | 740 × 1365 × 2400 mm |
Dimensions (non-assembled) |
740 x 1110 x 1450 mm |
Features |
Location: Indoor, Outdoor |
Pipework & Fittings |
316L Stainless Steel & ABS Plastic tubulars & fittings (top arm) |
Operating Valve |
316L Stainless steel |
Shower Spray Outlet |
Machine moulded nylon 6 |
Standard Finish |
White gloss painted tank |
Water Inlet |
1/2" Coupling |
Design Operating Pressure |
1.2 BAR G – PRE SET (17 PSI) |
Test Pressure |
10.3 BAR G (149 PSI) |
Minimum Flow Rates |
Shower: 76 litres/minute minimum |
Minimum Ambient Operating Temperature |
5º C (41º F) |
Maximum Ambient Operating Temperature |
35º C (95º F) |
Activation/operation |
Eye/face Wash Operation: Pull lid forward |
To contact Spill Station Australia about Hughes Portable Interim Eye / Face Wash | H-STD45GM use Get a quote.
The H-STD45GM portable safety eye/face wash is designed as a quick response, first-aid device for use where a plumbed-in unit is not available and must therefore be backed up by a method of further decontamination.
This unit is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe; it is then easily maneuvered to its required position, either by hand, or by fitting an ‘A’ frame (optional) and hooking up to a standard tow ball on a vehicle.
The wheel centres on the optional trolley can be adjusted to enable the unit to be taken through a standard door opening allowing it to be used in laboratories and work rooms etc.
The 114 litre carbon steel cylinder is polypropylene lined to avoid internal corrosion. The exterior is painted with acid resistant white enamel paint and fitted with pictogram ‘Emergency Shower’ signs to International Standard ISO 3864-1 and green and white safety stripes.
Note: Suitable for temporary use and capable of delivering a flush of water for over 1 ½ minutes.
Weight | 80 kg |
---|---|
Dimensions | 740 × 1365 × 2400 mm |
Dimensions (non-assembled) |
740 x 1110 x 1450 mm |
Features |
Location: Indoor, Outdoor |
Pipework & Fittings |
316L Stainless Steel & ABS Plastic tubulars & fittings (top arm) |
Operating Valve |
316L Stainless steel |
Shower Spray Outlet |
Machine moulded nylon 6 |
Standard Finish |
White gloss painted tank |
Water Inlet |
1/2" Coupling |
Design Operating Pressure |
1.2 BAR G – PRE SET (17 PSI) |
Test Pressure |
10.3 BAR G (149 PSI) |
Minimum Flow Rates |
Shower: 76 litres/minute minimum |
Minimum Ambient Operating Temperature |
5º C (41º F) |
Maximum Ambient Operating Temperature |
35º C (95º F) |
Activation/operation |
Eye/face Wash Operation: Pull lid forward |
To contact Spill Station Australia about Hughes Portable Interim Eye / Face Wash | H-STD45GM use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product