FOSS Grain Analyser | ProFoss™

FOSS - Grain Analyser | ProFoss™

Supplier: FOSS

Grain Analyser | ProFoss™

ProFoss™ for flour and whole grain

Video for FOSS Grain Analyser | ProFoss™

In Stock

ProFoss™ measures critical parameters such as ash, protein and moisture for control of incoming raw materials and in the final stages of the milling process. Accurate in-line flour analysis enables you to detect trends in your ash and moisture content, troubleshoot production malfunctions and secure final quality.

Value

Continuous real time analysis. Analysis directly in the production line. Facilitates immediate process adjustments.

Sample Type

Flour and whole grain.

Parameters

Protein, moisture and ash.

Features

Trend Analysis

ProFoss™ takes direct measurements inside the process. Sampling errors and sample preparation errors can therefore be minimized to almost zero. Monitoring process variations using a trend chart and a moving average function enables the detection of process variations of a laboratory analyser. Even if one result is wrong for some reason, this has no impact as a new result will be generated a few seconds later.

Easy Integration

ProFoss™ can easily be connected to your LIMS or ERP system.

Dedicated Sample Interface

Windows interface connected directly to the pipe
True in-line – no bypass – reduces waste and sampling errors
No moving parts
No carry over effects between analyses

FossConnect™

FossConnect™ is a centralised networking management solution for ProFoss™ that helps you reduce your production costs and secure the quality of your products. With FossConnect™, you can manage, configure and monitor your instruments remotely from any internet-enabled computer and safeguard your data for whenever you need it.

Technical Specifications

**ProFoss Reflection**
Analysis time	5 – 50 ms / integration time; Average time per result 3 – 15 seconds
Measurement mode	Reflection
Wavelength range	1100 – 1650 nm
Detector	InGaAs diode array
Spectral dispersion	1.1 nm / pixel
General
Light source lifetime	Dual lamp system MTBF = 17500 h
Software package	ISIscan™ for instrument control; ISIcal™ for calibration development
Wavelength accuracy	0.5 nm
Wavelength precision	< 0.02 nm
Wavelength stability	< 0.01 nm/°C
Noise	< 60 micro AU
Random vibrations	0.4 grms at 10 – 150 Hz according to IEC 60068-2-64 0.4 grms at 10 – 1250 Hz according to FOSS internal standard (more information available on request)
Temperature	-5 – 40°C (23 – 104°F). With purge -5 – 65°C (23 – 149°F)
Installation in ATEX zone	0 – 40°C (32 – 104°F). With purge 0 – 65°C (32 – 149°F)
Purge air	Flow rate minimum 5 l/min, > 99.9% water free, > 99.9% free of oil and fine particles down to 0.3μm
Ambient humidity	10 – 90 % relative
Dimensions	(w × h × d): 42 × 42 × 13.5 cm (16.5 × 16.5 × 5.3 inches) + brackets to hold the unit
Weight	25 kg / 55 lbs
Cabinet	1.5 mm (lid 2.5mm) Stainless Steel EN 1.4301 (SS2333)
Protection	IP69K 1) according to IEC 60529 and DIN 40050 part 9, NT ELEC 023
Industrial connectivity	OPC, Profibus, Profinet, 4-20 mA
Power supply	Recommended isolated or conditioned line power 100 – 240 VAC, 50 – 60 Hz, 2.0 A, 150W
1) IP6x is the highest protection for dust entering the unit. IPx9K means protected against the effect of high-pressure water and/or steam cleaning at high temperature.

To contact FOSS about FOSS Grain Analyser | ProFoss™ use Get a quote.