Fluke 9190A Ultra-Cool Field Metrology ...

Fluke - 9190A Ultra-Cool Field Metrology Well | Calibrator

Supplier: Fluke Australia

9190A Ultra-Cool Field Metrology Well | Calibrator

Fluke 9190A Ultra-Cool Field Metrology Well

Best-in-class stability

In Stock

Great for clean room environments

Calibration baths are the most stable and uniform temperature sources available, but they aren’t a good fit for clean rooms. The size of a bath limits its portability, and bath fluids can easily spill and give off vapors. The 9190A Ultra-Cool Field Metrology Well is a great alternative. Its wide temperature range brackets the coldest and highest temperature ranges required for pharmaceutical, biomedical and food processing applications. The 9190A is small and lightweight, making it easy to transport. And since it does not use heat transfer fluids, clean rooms stay clean. The 9190A cooling and heating times are faster than a calibration bath—that means calibration work gets done more quickly.

An accurate temperature source is critical for dependable process measurements

Unreliable process measurements can have a damaging impact on business, leading to poor product quality, recalls, fines, waste, and lost profits. Ultimately, measurements are only as good as the temperature sources used to calibrate the measurement equipment. The 9190A Ultra-Cool Field Metrology Well incorporates the best technology and design expertise gained from decades of dry-block development experience. The 9190A conforms with EURAMET cg-13 guidelines for best measurement practices for temperature block calibrators. As a result, you can be assured that the 9190A specifications for accuracy, stability, axial (vertical) uniformity, radial (well-to-well) uniformity, loading, and hysteresis have been thoroughly and carefully defined and tested. With a 9190A Ultra-Cool Field Metrology Well, you can be confident you’re using the most accurate and stable ultra-cool dry-block calibrator available. And that will have a positive impact on your business.

Key features

Ultra-cool dry-block calibrator with best-in-class stability

The Fluke 9190A Ultra-Cool Field Metrology Well is the most accurate and stable, cold temperature dry-block on the market. It’s ideal for applications that demand strict quality control and regulatory process compliance. These applications include on-location validation and calibration of RTDs, thermocouples, thermometers, and sensors used with process control equipment such as medical freezers, laboratory refrigerators, cold rooms, blood banks, sterilizers (autoclaves), and freeze dryers.

Wide temperature range

–95 °C to 140 °C

Excellent accuracy

Accuracy using built-in referencethermometer readout: ±0.05 °C full range

Display accuracy: ±0.2 °C full range

Best-in-class stability

±0.015 °C full range

Fast cooling time

23 °C to –90 °C: 80 minutes

23 °C to –95 °C: 90 minutes

140 °C to 23 °C: 60 minutes

Portability

Weighs only 16 kg (35 lbs)

Built-in front and back handlesfor easy two-handed carry

Best measurement practices

Conforms with EURAMET cg-13 guidance on measurement practices for temperature calibrators

To contact Fluke Australia about Fluke 9190A Ultra-Cool Field Metrology Well | Calibrator use Get a quote.

Great for clean room environments

An accurate temperature source is critical for dependable process measurements

Key features

Ultra-cool dry-block calibrator with best-in-class stability

Wide temperature range

–95 °C to 140 °C

Excellent accuracy

Accuracy using built-in referencethermometer readout: ±0.05 °C full range

Display accuracy: ±0.2 °C full range

Best-in-class stability

±0.015 °C full range

Fast cooling time

23 °C to –90 °C: 80 minutes

23 °C to –95 °C: 90 minutes

140 °C to 23 °C: 60 minutes

Portability

Weighs only 16 kg (35 lbs)

Built-in front and back handlesfor easy two-handed carry

Best measurement practices

Conforms with EURAMET cg-13 guidance on measurement practices for temperature calibrators

Read less...

To contact Fluke Australia about Fluke 9190A Ultra-Cool Field Metrology Well | Calibrator use Get a quote.

mpdf (15)(0.34MB)

Let Fluke Australia provide you with a quote

Supplier

Get a quote

Supplier: Fluke Australia

Location: Baulkham Hills, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Fluke Australia are also proudly displaying these credentials:

Employees:

6-20

Location:

Baulkham Hills , NSW

Joined:

Feb 2021

Level:

SitePartner Storefront

Verified:

Is this your product? Manage products / company details |

Report this product