Softing Ethernet IP to PROFINET Gateway ...

Softing - Ethernet IP to PROFINET Gateway - epGate PN

Supplier: Ti2 Pty Ltd

Ethernet IP to PROFINET Gateway - epGate PN

Ethernet IP Adapter to PROFINET Controller Gateway - Integration of PROFINET I/O Devices through mapping into Ethernet IP Control systems

Video for Softing Ethernet IP to PROFINET Gateway - epGate PN

EthernetIP, PROFINET, Rockwell

64 Recent Views In Stock

Reliable Operation Across Networks Boundaries

Connection to the EtherNet/IP network via the so- called adapter (slave); (upper RJ45 socket)
PROFINET controller (Master) functionality (lower RJ45 socket)
Direct access from EtherNet/IP scanner in the PLC to PROFINET field devices
Access to machines with internal PROFINET network by deploying I-Device capabilities (Support of Siemens PLCs)
Transparent exchange of I/O data
EtherNet/IP side is informed about PROFINET faults and diagnostics
EtherNet/IP PLC can activate PROFINET outputs explicitely by a quality value
PROFINET outputs switch to safe state if connection to the PLC is lost

Simple Integration Through Add-On Instructions

Data access of PLC program to PROFINET devices without requiring detailed PROFINET knowledge
Mapping between the two protocols generated by provided tools
Use of Add-On Instructions (AOI) containing detailed PROFINET data type definitions
Transparent communication overcoming protocol differences

Including configuration tool and integrated web server

PC-based configuration software for online access to PROFINET Devices with ready to use symbolic mapping information for the EtheNet/IP PLC‘s engineering software
Built-In web server for monitoring of mapping as well as of exchanged data

Technical Data
Hardware	Processor	Altera Cyclone V SoC with Dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR (power supply), RUN (operation), ERR (error), CFG (configuration)
	Status LEDs (EtherNet/IP)	Net (network), Mod (module)
	Status LEDs (PROFINET)	SF (system fault), BF (bus fault)
Connectors	Ethernet	2 x IEEE 802.3 100BASE-TX/10BASE-T (1 Ethernet port per protocol)
Physical Properties	Dimensions (H x W x D)	100 mm x 35 mm x 105 mm
	Weight	Approx. 0.25 kg
	Power Supply	18 VDC ... 32 VDC; SELV/PELV power supply mandatory. Typically 200 mA, maximum 1 A at switch-on
	Operating Temperature,	-40 °C … 55 °C (0 mm minimum distance)
	Horizontal DIN Rail	-40 °C … 65 °C (17.5 mm minimum distance)
	Operating Temperature,	-40 °C … 40 °C (0 mm minimum distance)
	Vertical DIN Rail	-40 °C … 50 °C (17.5 mm minimum distance)
	Storage Temperature	-40 °C … 85 °C
	Relative Humidity	10 % ... 90 %, non condensing
	Cooling	Convection, no fan
	Mounting	DIN Rail (35 mm)
	Housing Type	Phoenix Contact ME MAX 35 mm
	Protection Class	IP20
Software	Protocols	EtherNet/IP Adapter: up to 2 Input Assemblies and 2 Output Assemblies with up to 255 Bytes data each, min. RPI: 2 ms PROFINET Controller support for up to 16 (standard) or 32 (optional) PROFINET devices, down to 250µs cycle time
	Additional Functionality	Mapping application, web server
	Verified with	Rockwell Automation PLC Programming Software: V19, V24, V30
Conformity	EMC directive 2014/30/ EU	Applied harmonised standards: EN 55011 Industrial, scientific and medical (ISM) devices - radio disturbance - limits and methods of measurement EN 55032 Electromagnetic compatibility of multimedia equipment (MME) and interference emission EN 61000-6-4 Electromagnetic compatibility (EMC); Part 6-4: generic standard - emission for industrial environments EN 61000-6-2 Electromagnetic compatibility (EMC); Part 6-2: generic standard - immunity for industrial environments
	ROHS directive 2011/165/EU	A Declaration of Conformity in compliance with the above standards has been made and can be requested from Softing Industrial Automation GmbH.
	FCC	This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules.
	VCCI	This Class A product conforms to the regulations of Voluntary Control Council for Interference (VCCI) by Information Technology Equipment.

Reliable Operation Across Networks Boundaries

Connection to the EtherNet/IP network via the so- called adapter (slave); (upper RJ45 socket)
PROFINET controller (Master) functionality (lower RJ45 socket)
Direct access from EtherNet/IP scanner in the PLC to PROFINET field devices
Access to machines with internal PROFINET network by deploying I-Device capabilities (Support of Siemens PLCs)
Transparent exchange of I/O data
EtherNet/IP side is informed about PROFINET faults and diagnostics
EtherNet/IP PLC can activate PROFINET outputs explicitely by a quality value
PROFINET outputs switch to safe state if connection to the PLC is lost

Simple Integration Through Add-On Instructions

Data access of PLC program to PROFINET devices without requiring detailed PROFINET knowledge
Mapping between the two protocols generated by provided tools
Use of Add-On Instructions (AOI) containing detailed PROFINET data type definitions
Transparent communication overcoming protocol differences

Including configuration tool and integrated web server

PC-based configuration software for online access to PROFINET Devices with ready to use symbolic mapping information for the EtheNet/IP PLC‘s engineering software
Built-In web server for monitoring of mapping as well as of exchanged data

Technical Data
Hardware	Processor	Altera Cyclone V SoC with Dual-core ARM Cortex-A9
	Status LEDs (Gateway)	PWR (power supply), RUN (operation), ERR (error), CFG (configuration)
	Status LEDs (EtherNet/IP)	Net (network), Mod (module)
	Status LEDs (PROFINET)	SF (system fault), BF (bus fault)
Connectors	Ethernet	2 x IEEE 802.3 100BASE-TX/10BASE-T (1 Ethernet port per protocol)
Physical Properties	Dimensions (H x W x D)	100 mm x 35 mm x 105 mm
	Weight	Approx. 0.25 kg
	Power Supply	18 VDC ... 32 VDC; SELV/PELV power supply mandatory. Typically 200 mA, maximum 1 A at switch-on
	Operating Temperature,	-40 °C … 55 °C (0 mm minimum distance)
	Horizontal DIN Rail	-40 °C … 65 °C (17.5 mm minimum distance)
	Operating Temperature,	-40 °C … 40 °C (0 mm minimum distance)
	Vertical DIN Rail	-40 °C … 50 °C (17.5 mm minimum distance)
	Storage Temperature	-40 °C … 85 °C
	Relative Humidity	10 % ... 90 %, non condensing
	Cooling	Convection, no fan
	Mounting	DIN Rail (35 mm)
	Housing Type	Phoenix Contact ME MAX 35 mm
	Protection Class	IP20
Software	Protocols	EtherNet/IP Adapter: up to 2 Input Assemblies and 2 Output Assemblies with up to 255 Bytes data each, min. RPI: 2 ms PROFINET Controller support for up to 16 (standard) or 32 (optional) PROFINET devices, down to 250µs cycle time
	Additional Functionality	Mapping application, web server
	Verified with	Rockwell Automation PLC Programming Software: V19, V24, V30
Conformity	EMC directive 2014/30/ EU	Applied harmonised standards: EN 55011 Industrial, scientific and medical (ISM) devices - radio disturbance - limits and methods of measurement EN 55032 Electromagnetic compatibility of multimedia equipment (MME) and interference emission EN 61000-6-4 Electromagnetic compatibility (EMC); Part 6-4: generic standard - emission for industrial environments EN 61000-6-2 Electromagnetic compatibility (EMC); Part 6-2: generic standard - immunity for industrial environments
	ROHS directive 2011/165/EU	A Declaration of Conformity in compliance with the above standards has been made and can be requested from Softing Industrial Automation GmbH.
	FCC	This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules.
	VCCI	This Class A product conforms to the regulations of Voluntary Control Council for Interference (VCCI) by Information Technology Equipment.

Read less...

To contact Ti2 Pty Ltd about Softing Ethernet IP to PROFINET Gateway - epGate PN use Get a quote.

Let Ti2 Pty Ltd provide you with a quote

Supplier

Get a quote

Supplier: Ti2 Pty Ltd

Distribution: Australia and New Zealand Only

Location: Rhodes, NSW

Customers: Cochlear, Nanosonics

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Ti2 Pty Ltd are also proudly displaying these credentials:

Established:

2001

Employees:

1-5

Customers:

Cochlear, Nanosonics

Memberships:

Profibus & Profinet Association

Certifications:

CE, EN50155, MIL, IEC 61131-3

Distribution:

Australia and New Zealand Only