Automatic Transfer Switch | ATL600/610 Get latest price

Automatic Transfer Switch | ATL600/610

Automatic Transfer Switch | ATL600/610

35 Recent Views In Stock

ATL600 / 610:

Auxiliary Supplies:

• auxiliary supply voltage: 110…240VAC 12/24VDC only for ATL 610.
• operating range: 90…264VAC; 9…36VDC only for ATL 610.

Voltage measurement inputs:

• rated voltage Ue: 100…480VAC (L-L)
• measuring range: 50…576VAC (L-L).
• frequency range: 45…65Hz..

Programmable digital inputs

• negative inputs.

Programmable relay outputs

• 5 each with 1 normally open contact (NO – SPST) rated 8A 250VAC.
• 2 each with 1 changeover contact (NO/NC – SPDT) rated 8A 250VAC.

Enclosure

• flush-mount housing: 144x144mm/5.7×5.7”.
• protection rating: IP40 on front; IP65 optional with seal EXP80 01; IP20 at rear.

 

General Characteristics:

• Supply Input
  • single in AC for ATL600.
  • dual in AC and DC for ATL610.
• Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
• 128×90 backlit graphic LCD to display measurements, events and alarms in 5 languages (English, Italian, French, Spanish and German).
• 2 status indication LEDs
• 6 programmable digital inputs.
• 7 programmable relay outputs.
• Viewing of L-L and L-N voltage values of the controlled lines.
• Status viewing of contactor or motorised circuit breakers.
• Configuration programming of lines, control and supervision parameters for emergency demand of generating set.
• Event logging.
• Microprocessor supervision of functions; including virtual real time clock for ATL610.
• Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
• Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
• Modbus-RTU, ASCII and TCP communication protocol.

 

Control Functions of the Lines:

• Phase sequence and phase loss.
• Minimum and maximum voltage.
• Voltage asymmetry.
• Minimum and maximum frequency.

 

Order Code	Description
ATL600	Non-expandable, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×7.7″), 110…240VAC supply, 0.600kg.
ATL610	Expandable with EXP… modules, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×5.7″), 110…240VAC supply and 12/24VDC, 0.680kg.

 

Read more...

To contact Mechtric about Automatic Transfer Switch | ATL600/610 use Get a quote.

ATL600 / 610:

Auxiliary Supplies:

• auxiliary supply voltage: 110…240VAC 12/24VDC only for ATL 610.
• operating range: 90…264VAC; 9…36VDC only for ATL 610.

Voltage measurement inputs:

• rated voltage Ue: 100…480VAC (L-L)
• measuring range: 50…576VAC (L-L).
• frequency range: 45…65Hz..

Programmable digital inputs

• negative inputs.

Programmable relay outputs

• 5 each with 1 normally open contact (NO – SPST) rated 8A 250VAC.
• 2 each with 1 changeover contact (NO/NC – SPDT) rated 8A 250VAC.

Enclosure

• flush-mount housing: 144x144mm/5.7×5.7”.
• protection rating: IP40 on front; IP65 optional with seal EXP80 01; IP20 at rear.

 

General Characteristics:

• Supply Input
  • single in AC for ATL600.
  • dual in AC and DC for ATL610.
• Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
• 128×90 backlit graphic LCD to display measurements, events and alarms in 5 languages (English, Italian, French, Spanish and German).
• 2 status indication LEDs
• 6 programmable digital inputs.
• 7 programmable relay outputs.
• Viewing of L-L and L-N voltage values of the controlled lines.
• Status viewing of contactor or motorised circuit breakers.
• Configuration programming of lines, control and supervision parameters for emergency demand of generating set.
• Event logging.
• Microprocessor supervision of functions; including virtual real time clock for ATL610.
• Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
• Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
• Modbus-RTU, ASCII and TCP communication protocol.

 

Control Functions of the Lines:

• Phase sequence and phase loss.
• Minimum and maximum voltage.
• Voltage asymmetry.
• Minimum and maximum frequency.

 

Order Code	Description
ATL600	Non-expandable, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×7.7″), 110…240VAC supply, 0.600kg.
ATL610	Expandable with EXP… modules, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×5.7″), 110…240VAC supply and 12/24VDC, 0.680kg.

 

Read less...

To contact Mechtric about Automatic Transfer Switch | ATL600/610 use Get a quote.