Atlas Copco - Lighting Tower - HiLight H6+ Get latest price

The HiLight H6+ comes with the innovative HardHat® body, made of medium-density polyethylene rather than metal, to protect the working operation underneath from the elements. The HardHat® is resistant to corrosion, lightweight, crack-resistant, environmentally friendly, and better able to meet the tough demands of on-site use.

It features a new generation of LED floodlights that are more efficient and provide optimal light distribution up to 6.000 m2 illumination area with a life expectancy of 50.000 hours. To offer the right luminosity at each moment and increased autonomy, the new HiLight H6+ comes with a dimming function on the easy-to-use control panel, located in an exterior lateral of the light tower.

Maintenance and transport efficiency were priority when designing the HiLight H6+. On the first front, the light tower only requires a simple service after 600 hours of operation which can be carried out in 40 minutes.

LED light tower HiLight H6+ Features

• HardHat Body
• Up To 40% less fuel and CO2 Emissions
• -5 dB(A) Lower Noise – 55dBA
• 6.000m2 Light Coverage
• 50.000Hrs Life Span

Quick Spec

• Fuel Consumption 0.65L Per Hour
• LED Lamps
• Foot Print2.1 x 1.3 (8 units per 40’ truck)
  • 600Hr Service Intervals

To contact Construction Equipment Australia (CEA) about Atlas Copco Lighting Tower - HiLight H6+ use Get a quote.

The HiLight H6+ comes with the innovative HardHat® body, made of medium-density polyethylene rather than metal, to protect the working operation underneath from the elements. The HardHat® is resistant to corrosion, lightweight, crack-resistant, environmentally friendly, and better able to meet the tough demands of on-site use.

It features a new generation of LED floodlights that are more efficient and provide optimal light distribution up to 6.000 m2 illumination area with a life expectancy of 50.000 hours. To offer the right luminosity at each moment and increased autonomy, the new HiLight H6+ comes with a dimming function on the easy-to-use control panel, located in an exterior lateral of the light tower.

Maintenance and transport efficiency were priority when designing the HiLight H6+. On the first front, the light tower only requires a simple service after 600 hours of operation which can be carried out in 40 minutes.

LED light tower HiLight H6+ Features

• HardHat Body
• Up To 40% less fuel and CO2 Emissions
• -5 dB(A) Lower Noise – 55dBA
• 6.000m2 Light Coverage
• 50.000Hrs Life Span

Quick Spec

• Fuel Consumption 0.65L Per Hour
• LED Lamps
• Foot Print2.1 x 1.3 (8 units per 40’ truck)
  • 600Hr Service Intervals

Read less...

To contact Construction Equipment Australia (CEA) about Atlas Copco Lighting Tower - HiLight H6+ use Get a quote.