3D Printer

3D Printer | Bulltech M160

Supplier: Plasquip Sales and Smart Manufacturing & Packaging Solutions

3D Printer | Bulltech M160

In Stock

SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.

M160
LASER SYSTEM	Type:fiber laser Wave length:1064nm Power:200W
RECOATING SYSTEM	Process:scraper coating Layer Thickness:0.02-0.1mm
OPTICAL & SCANNING	Beam (diameter@1/e2):0.05-0.15mm Scanning Galvanometer:ScanLab Scanning Speed:up o 10.0m/s
ELEVATOR	Drive mode :servo motor precision reduction drive Printing board bearing weight :≥200kg Repositioning accuracy: ±0.01mm
BUILD VAT	Volume:Approx. 2.6L Size:160mm(X)160mm(Y)100mm(Z) Heat: Precision resistance wire heating Protective gas:N2 / Argon Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper Alloy / Precious Metal etc.
SOFTWARE	Control Software:Bulltech Date Preparation Software:3dLayer/Materialise Magics Data Interface:CLI file, SLC file, STL file
WORKING CONDITION	Power:200~240VAC 50/60Hz, single phase, 25Amps Ambient Temperature:15-36ºC Relative Humidity:≤ 40% Dimension: 1100mm(L)1280mm(W)1850mm(H)

Key Features

Parts with high quality surface before polishing

Parts in high accuracy, for precision samples

Directly produce functional metal parts, simplify the manufacture process

Parts have metallurgy and mechanical properties, density over than 99%.

Especially for single part or small amount of functional parts

Bus control system makes the machine faster

Remote APP monitoring and Smart pushing information

International high standard components, more stable and reliable

Self developed and patented control and slicing software, easy to use and cost saving

To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about 3D Printer | Bulltech M160 use Get a quote.

M160
LASER SYSTEM	Type:fiber laser Wave length:1064nm Power:200W
RECOATING SYSTEM	Process:scraper coating Layer Thickness:0.02-0.1mm
OPTICAL & SCANNING	Beam (diameter@1/e2):0.05-0.15mm Scanning Galvanometer:ScanLab Scanning Speed:up o 10.0m/s
ELEVATOR	Drive mode :servo motor precision reduction drive Printing board bearing weight :≥200kg Repositioning accuracy: ±0.01mm
BUILD VAT	Volume:Approx. 2.6L Size:160mm(X)160mm(Y)100mm(Z) Heat: Precision resistance wire heating Protective gas:N2 / Argon Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper Alloy / Precious Metal etc.
SOFTWARE	Control Software:Bulltech Date Preparation Software:3dLayer/Materialise Magics Data Interface:CLI file, SLC file, STL file
WORKING CONDITION	Power:200~240VAC 50/60Hz, single phase, 25Amps Ambient Temperature:15-36ºC Relative Humidity:≤ 40% Dimension: 1100mm(L)1280mm(W)1850mm(H)

Key Features

Parts with high quality surface before polishing

Parts in high accuracy, for precision samples

Directly produce functional metal parts, simplify the manufacture process

Parts have metallurgy and mechanical properties, density over than 99%.

Especially for single part or small amount of functional parts

Bus control system makes the machine faster

Remote APP monitoring and Smart pushing information

International high standard components, more stable and reliable

Self developed and patented control and slicing software, easy to use and cost saving

Read less...

To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about 3D Printer | Bulltech M160 use Get a quote.

SLM9(2.77MB)

Let Plasquip Sales and Smart Manufacturing & Packaging Solutions provide you with a quote

Supplier

Get a quote

Supplier: Plasquip Sales and Smart Manufacturing & Packaging Solutions

Distribution: Australia and New Zealand

Location: Mildura, VIC

Customers: Woolworths Group, 1000 plus in the Plastics Industry

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Plasquip Sales and Smart Manufacturing & Packaging Solutions are also proudly displaying these credentials:

Established:

2004

Employees:

1-5

Customers:

Woolworths Group, 1000 plus in the Plastics Industry

Memberships:

APPMA

Distribution:

Australia and New Zealand

Location:

Mildura , VIC